• Firing Pin and Spring
• Heat Treated Steel
• Improved Design for Reliability
• Enlarged Hammer Contact Area
• Dry fire safe

The Magload RELIAPIN is an upgraded firing pin and spring for your .22lr rifle. Designed for greater reliability and longevity, our heat-treated steel firing pin won't let you down. Reduce both firing pin and firing pin spring breakages with the RELIAPIN! Special material, geometry and spring means that the RELIAPIN will last much longer than other pins. The improved hammer contact area and firing pin protrusion are tuned for reliability for when you need it the most. Available for:

• Smith and Wesson M&P 15-22
• CMMG .22 Conversion Kit and Bolt
• Kriss Defiance DMK
• Sig Sauer 522

The 15-22 Reliapin features an enlarged hammer contact area giving greater reliability with all aftermarket AR15 triggers. Proprietary improved firing pin & spring included with all firing pins. Developed with and tested by some of the best shooters in the world. Safe for dry fire!

• Occupies the chamber to show the chamber is clear
• Suitable for all .22 chambers
• Rail mount for when not in use
  
• Optional flag holder

Secure the action with the rail mount .22 breech flag! Designed to stand off from the bolt face to protect your extractor and a relief cut on the underside to protect barrel mounted ejectors, such as the one on a Smith and Wesson M&P 15-22.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection, or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

• Hyper-lightweight
• Designed specifically for .22lr and .22 WMR
• Available in 1/2x20 UNF and 1/2x28 UNEF threads
• Available in 3/4" and 1" sizes

We took compensator science back to its roots to use the small amount of gas produced by a .22 round, bringing you a compensator that will keep your muzzle perfectly flat.

SLS printed to create geometry that’s impossible to machine, keep weight down, and make it economically priced. 

Both 3/4" and 1" brakes come with a timing nut for proper alignment with the barrel.

Available in 1/2x20 UNF and 1/2x28 UNEF threads.

• UNEF fits most AR-15 type .22 rifles - We can confirm the Smith and Wesson 15-22, Kriss Defiance, and Tippman M4-22 have 1/2x28 UNEF threads.

• UNF fits most other .22 rifles - We can confirm the Ruger 10/22 has 1/2x20 UNF threads.

Torture tested with a rapid 500 rounds and guaranteed for 10,000 rounds:

• Ultra lightweight
• Optimised sight picture for IPSC
• Low profile
• Tough Polymer Construction

Purpose built flip-up sights for IPSC/USPSA rifle and mini rifle, low profile and ultra lightweight. Ideal for a first set of primary IPSC sights or backup/offset sights. With both front and rear sights being elevation and windage adjustable you can find the perfect position for your eye and cheek weld. Front Sight:

• Ultra-lightweight 14.8g
• NATO / Picatinny rail mount
• Pro P4 style post, 2.5mm post with 1.5mm aperture, always in the centre of the hood
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

Rear Sight:

• Ultra-lightweight 14.2g
• NATO / Picatinny rail mount
• 1.75mm aperture with single light trap
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

45 Degree Offset

• Same sights as above
• Front 16.5g, rear 15.9g
• Calculated sight position to be a perfect 45 degree rotation from the centre of the bore