The Clic belt clip system is designed specifically for IPSC, 3 Gun and USPSA disciplines to be rock solid on the belt, with the QRB 1.5" or QRB 2.0" accessories becoming quick and easy to remove with the quick-release function. Clic takes up the absolute minimum amount of space, so you can stack them close together if needed, giving you additional room for belt accessories.

There are 4 options of bases, the Solo, QRB 1.5", QRB 2.0", or QRB Velcro:

• Clic Solo - For permanent attachment of accessories.
• Clic QRB 1.5" - Quick release base for standard 1.5" 2-part IPSC belts.
• Clic QRB 2.0" - Adjustable quick-release base for any 1.0"-2.0" belts in 0.25" increments with supplied spacers.
• Clic QRB Velcro - Velcro mounted QRB base for velcro competition belts, velcro applied as standard, screw holes available for fixed mount.

For both QRB bases, there is a range of compatible different-size mounting plates for any application:

• The single-row QRS plate is for all MAGLOAD loaders and other accessories like magazine pouches, with 3x bolt holes.
• The triple-row QRT plate is for people who are moving to this system from a Tek Lok or Hoppner & Schumann belt clip and want the same layout.
• The ball joint QRA plate is for angle-adjustable single-hole mounting such as magazine pouches. Designed specifically for the Double Alpha XiP and Race Master pouches
• The Clic One plate is one plate to fit on all QRB bases, one slot for adjustability and versatility, sized for the QRB 2.0".

Clic uses captured nuts for easy assembly. The clips can be used with hex bolts instead of nuts should you want threaded studs, and can be configured in many ways to suit what you need. All the hardware we supply is marine-grade stainless steel for maximum weather protection. Solo is 60x24mm, 14.5mm deep, and sits 5.5mm from the belt. QRB 1.5" is 60x24mm, 16.5mm deep, and sits 7.5mm from the belt. QRB 2.0" is 72x24mm, 20mm deep, and sits 11mm from the belt. All clips and Solo come with 2x nuts, 2x bolts, and 2x spacers.

• Extremely light and predictable pull
• High and adjustable retention
• Lightest self-adjusting loader in the world, from 92g
• Velcro Competition Belt Available Here
• Huge variety of mounting and assembly options
• Tool-free self-adjustment for all usable cartridge lengths

The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!

The Nexus PRO quadloading system is our ultimate loader, lighter than any other spring adjustable loader on the market. Completely UK made, set-and-forget, left and right-handed shotgun cartridge caddy in 4, 8, 12, 14, 16, 20, 24, 28, and 32 options.

The Nexus PRO comes with:

• Your loader
• PS51 Industrial Velcro, cut to size, with an alcohol swab
• Belt clip spacers
• 10mm and 5mm spring adjustment spacers

We recommend a full belt setup would be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages. Note: Velcro Competition Belt or belt clips are sold separately.

DESCRIPTION

Nexus PRO is a set and forget system which will take any cartridge with an unfired length from 50-67.5mm (most manufacturers will quote the fired cartridge length in their technical date). That means any cartridge, bird, buck or slug that you would use in training or competition will fit in the Nexus PRO system with no further adjustment. The Nexus system can be set up either left or right-handed and changed at any time using just one Allen key. The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!

The Nexus PRO is built with IPSC and USPSA in mind and therefore conforms perfectly to IPSC and USPSA rules, but the Nexus PRO is even more suitable to 3 Gun and other disciplines than ever before. Competitors have been using the Nexus PRO in it's 4up and 8up configurations with great success in 3 Gun and other multigun disciplines.

Versatility

• Can be set up right or left-handed
• Load twins or quads whenever you want
• Self adjusts to fit any cartridge used in dynamic shooting
• Can be fitted to CLIC, Tek Loks, ELS clips or our  Velcro Competition belt
• Fully Modular
• Adjustable spring tension and hand clearance
• 4, 8, 12, 14, 16, 20, 24, 28, and 32 round configurations available

Construction

• Aerospace-grade aluminium backplate, hard anodised
• The Nexus PRO is just 50mm from front to back, including cartridges (49mm without). There is no danger of exceeding the IPSC 75mm rules even with a loose belt or a thick attachment mechanism (Tek Lok or Velcro).
• The plastic parts are made using the latest in 3D manufacturing technology. From -50 degrees C, to 150 degrees C; the Nexus PPRO will always work as you expect it to!
• Minimal maintenance is required. Self-cleaning even through the thickest of mud and sand.
• We are using the latest in materials technology to utilise spring systems that will be long lasting and corrosion-free.

Easy to use

• The Nexus PRO can be supplied in a ready-to-assemble state with clear and comprehensive instructions or assembled for you in a right or left-handed configuration.
• Set and forget. Once the loader is assembled it never needs to be adjusted as it will self adjust to any usable cartridge length.
• Low release force and natural release directions.
• When emptied of ammo the loader collapses down to the smallest possible footprint. An empty loader will not get in the way during bending, crouching or any other form of PSG acrobatics.

Weights: PRO4 92g, PRO8 178g, PRO12 265g, PRO14 305g, PRO16g 354, PRO20 428g, PRO24 527g, PRO28 617g, PRO32 695g

As standard, the Nexus PRO comes with our lifetime warranty.

• Secure and easy to use buckle
• Rapid fastening and adjustment
• Premium 6mm thick rubber and cork construction, with a grippy inner surface and genuine Velcro outer
• Compatible with all Nexus and Reflex loaders

SIZING: Measure around where you will wear the belt (around the belly button) + clothes and order the largest belt that will fit you.

The sizes accommodated are:

• Small 26-44" (18" of belt space)
• Medium 34-54" (26" of belt space)
• Large 42-60" (32" of belt space)

Everyone knows how to use a seat belt, and everyone knows how secure a seat belt is. Quick to fasten and quick to adjust. Avoid the faux pas of a belt coming off in IPSC, USPSA and 3 Gun competition by using the MAGLOAD Velcro Competition Belt.

Using our proprietary rubber and cork core construction, we’ve thinned this belt down to a mere 6mm, further reducing weight and increasing your range of movement without sacrificing rigidity for your loaders. 100mm wide genuine Velcro ensures that your loaders and accessories stay where you put them.

Supplied with a Magload PVC Patch and an integrated elastic strap to secure excess webbing.

Nexus PRO loaders are sold separately here

Nexus Element Gen II loaders are sold separately here

Breech Flag and Holder are sold separately here

Note: for the Small size belt, we recommend a maximum two-loader set-up of a 12 and 24, or up to a single 32. Medium and Large sizes will comfortably fit a two-loader set-up of up to a 14 and 32.

• Fast loading of magazines
• No need to handle ammunition
• Tip and shake up to a 100 rounds into the hopper
• Works with many types of .22 rifles and pistols

The Lightnin' Grip Loader from McFadden Machine is a versatile .22LR speedloader compatible with 30+ different magazine types using interchangeable adapters. It's currently the fastest speedloader for .22LR magazine in production, you can load a 25 round magazine in 10-15 seconds.

McFadden Lightning Grip adapters are sold separately. Please make sure you order the correct adapter for your magazine(s) to go with your loader.

Adapters can be quickly changed by depressing the locking button on the loader and swapping in a new one. They are also compact so it is easy to keep a few different sizes on your range bag.

Adapters:

• #M0 Magload AR-22 (Compatible with and without AR-22 Adapters fitted) (Not Compatible with Tippmann AR-22 Adapter)
• #M1 Magload AR-22 Tippmann (Compatible with our AR-22 Magazine and Tippmann AR-22 Adapter fitted only, not compatible with original Tippmann magazines)
• #M2 Magload K22 Grand Power
• #1 S&W M&P 15-22
• #2 AR15 .22LR  (including Black Dog, Kriss DMK-22, Sig 522, CMMG and Lantac magazines)

• Occupies the chamber to show that the chamber is clear
• Compact design
• Flag holder holds all breech flags
• Suitable for all 12g chambers

Suitable for all 12g shotguns, secure the action with the MAGLOAD breech flag!

Featuring a relief to clear the extractor, preventing damage. Designed to have a compact size and accommodate a hole for any keyring you may want to hang from it.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial Velcro and also holes for direct attachment.

• Occupies the chamber to show the chamber is clear
• Suitable for all .22 chambers
• Rail mount for when not in use
  
• Optional flag holder

Secure the action with the rail mount .22 breech flag! Designed to stand off from the bolt face to protect your extractor and a relief cut on the underside to protect barrel mounted ejectors, such as the one on a Smith and Wesson M&P 15-22.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection, or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

Quick detach CLIC breech flag holders for 12g or .22lr and .223 breech flags, both can also be used as convenient glasses holders! Quickly switch between breech flag holders with CLIC. Compatible with the Magload Clic system, will require a CLIC QRB belt clip attachment or CLIC Security Buckle. 

• CLIC 12g Holder fits Magload 12g flags
• CLIC .22/.223 Holder fits Magload .22 and .223 flags

Click here for the Quick Release Base this clip attaches to.

*flag not included unless selected as an option

• Durable Kydex Construction
• Adjustable Retention
• Versatile Ambidextrous Mounting Slots
• Clic Belt Clips Available Here

Designed specifically for IPSC, 3 Gun and USPSA disciplines to offer secure and reliable retention for your rifle magazines.

Currently available are; - S&W 15-22 Pouch: Compatible with our AR-22 magazines (without adapters fitted) and 15-22 magazines. - AR-15 Mil-Spec Pouch: Compatible with our AR-22 magazines (with adapters fitted) and mil-spec magazines (tested with all PMAG, Kriss DMK, Tippmann M4-22, Blackdog, Lancer, Stanag).

Moulded Kydex construction, from P1 2mm Kydex T, with rubber washers for adjustable retention. Each pouch features mounting slots on both sides for attaching to a range of belt clips including Tek Lok, Safariland ELS, and our own CLIC system. Offering up to 45 degrees of angle adjustment on the belt clip. We recommend using our CLIC Drop Link to lower the magazine for a more ergonomic grab and either a CLIC SOLO for a static mount or a CLIC QRB + QRS for quick-release mounting.

Lifetime warranty as standard.

Note: Belt clip attachments are sold separately here. For a static mount, we recommend a Clic Solo, for quick detach, we recommend a CLIC QRB + QRS. In addition to either we would also recommend a CLIC Link to lower the pouches from the belt for a more ergonomic grab.

• Stiff, rigid with little flex

• Two-part velcro design

• Compatible with CLIC, Double Alpha, Tek Lok and Safariland Belt Clips

• 1.5" Width, rectangular profile

• CLIC security buckle and Magload PVC patch included

Designed from the ground up to be the stiffest, lightest two-piece shooting belt on the market, giving superb support to any accessories you want to mount. Perfect for IPSC, USPSA, 3 Gun, and other competitive shooting disciplines. 

"The Stiffy" 2-part IPSC belt is 1.5" wide and only 0.25" thick, making it compatible with CLIC, Tek Lok, Double Alpha, and Safariland belt clip systems. Ideal for handgun, rifle or shotgun shooting. The two-part design uses the highest quality Velcro to ensure a secure attachment every time. Featuring a 5.5" strip of velcro on the front section for any patches.

The inner belt features a chamfer for easy threading through belt loops, a 1mm polymer reinforcing layer for added stiffness and only 3.25mm thick, comfortably worn over any trouser belt. The outer belt also features a chamfer for easy threading through belt loops, a rectangular profile for accessory stability, a strong 4mm polymer reinforcing core and maximum velcro availability on the back. Included with each belt are a CLIC security buckle and a Magload PVC morale patch. Available sizes are:

• 105cm - (Fits waist size 26-35") - 284g
• 121cm - (Fits waist size 32-41") - 312g
• 136cm - (Fits waist size 38-47") - 325g
• 151cm - (Fits waist size 43-53") - 399g
• 176cm - (Fits waist size 51-63") - 456g

• Consistency of oil with lubricating properties of grease
• High level of corrosion protection
• Extreme temperature performance: From -18C to 230C
• Extremely low “stiction”
• Suitable for a wide range of metals and plastics

MagLube is a high-performance, premium gun oil with the lubricating properties of grease but the consistency of oil. MagLube is for the demanding conditions of practical shooting with high round counts and extreme temperature conditions. Use on all sliding and working parts of the gun and feel the difference instantly.

It maintains extremely high lubricity under all conditions. Even when frozen retains exceptionally low stiction and high lubrication qualities.

Ultra-low stiction, high adhesion, and high shear strength are the main features of Maglube.

•  Low stiction means parts move easier, triggers feel smoother, and actions work more reliably.

• High shear strength means that under the pressure of firing or cycling the oil will continue to lubricate rather than being pushed outwards.

•  High adhesion means even a thin layer will stay where you put it, and continue working until you clean it off.

MagLube holds dirt in suspension. When applied to clean parts, subsequent cleaning just requires a wipe with a dry microfibre cloth or tissue paper, and clean & fresh oil can be reapplied over the top.

Maglube is skin safe for worry-free field stripping.

All sizes have a child-safe cap with a thin-tip applicator for getting to hard-to-reach places.

Part of our CLIC belt clip range, the 12g Holder retains either one (single) or two (double) 12g cartridges for your initial load or for when you've exhausted everything else!

The 12g Holder is quick-release and mounts into the CLIC QRB or CLIC Security Buckle, which can be purchased separately here. Made from a highly durable and lightweight polymer for all conditions. Lifetime warranty as standard.

Click here for the Quick Release Base this clip attaches to.

• Pocket sized
• Lightweight and durable
• Squeeze and drop in a round - 1 per second
• Fits almost all standard pistol magazines

This universal pistol magazine loader and unloader takes all the thumb work out of loading magazines. Anyone who has loaded full mags with mighty springs like new Glock mags will not look back after trying one. Loads all calibres between 9mm and 45 ACP size (9mm, .357 Sig, 10mm, .40, and .45ACP) including 1911 mags for almost all manufacturers. Also loads most .380 double stack magazines. Works with magazines from the following manufacturers: Astra, Auto Ordnance, Arex, Barak, Beretta, Browning, Bul, Colt, CZ, EAA, FN, Glock, HK, Hi-Point, High Standard, Jericho, Kahr, Kel-Tec, Kimber, Les Baer, Llama, Luger, Magnum Research, Para Ordnance, Phoenix Arms, Ruger, Sigma, Sig/Sauer, S&W, Springfield Armory, Star, Steyr, Taurus, Vector, Walther. Will not work with the following models:

• Glock G36 6 round
• Glock G37, G38 or G39 in .45 GAP
• Kel-tec PMR-30
• Luger P08 in 9mm
• S&W 7 round 9mm for models 908, 3913, 3953 & 3954

Will not load cartridges longer than 33mm or magazines with feedlips narrower than 8mm.    

• Occupies the chamber to show that the chamber is clear
• Suitable for all 12g chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Flag holder can be attached with velcro (supplied) or by bolting to a Tek Lok or directly to the belt

Secure the action with the Magload rail mount 12g breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

• Made from durable and long lasting vinyl
• 1” x 8”
• 10 colours available
• Official Magload font

Our official Magload vinyl sticker, perfectly sized to fit on your shotgun magazine tube, receiver, handguard, stock or even your car!

We’ve been using these stickers for Team Magload, and even with our high standards, they can live up to whatever has been thrown at them.

• Worlds First Self Collapsing Loader
• 4, 8 and 12 Capacity Available
• Left/Right Hand Switchable
• Variety Of Mounting Options
• REFLEX Option 3 Loader Available Here

Welcome to REFLEX, the world's first self collapsing quad and dual shotgun loader.

Designed for the 3-Gun and IPSC market the REFLEX loader is available as a 4, 8 or 12 round capacity shotgun caddie which completely folds up after deployment. In the collapsed position the REFLEX becomes the world's smallest loader reducing the chance of snagging and making it far easier to go prone or take other positions during a stage. High strength magnets hold your cartridges in place during high energy movements while the light release force means it’s fast to load from.

Constructed from aerospace-grade hard anodised aluminium and polymer for long lasting and corrosion-free use. Minimal maintenance is required, and self-cleaning even through the thickest of mud and sand. The stainless steel collapsing springs have been heat treated for durability. REFLEX can be configured to be right or left-handed in seconds giving you ultimate flexibility in your competition set-up. Weights: Reflex 12 - 311g, Reflex 8 - 207g and Reflex 4 - 103g

Capable of being mounted with a variety of solutions, including CLIC, Tek Loks, other belt clips and Velcro.

Supplied in the box are 1 x REFLEX loader, 2 x attachment spacers, 1 x Velcro piece and 1 x alcohol wipe Lifetime warranty as standard.

• Geometry designed to hold a round as securely as needed
• Easy, directional release
• Self adhesive velcro supplied
• Fast empty start loads

The Option 3 Loader presents a cartridge just outside the chamber which can be instantly inserted on the buzzer during an option 3 empty start. Giving you rock-solid reliability and an effortless directional release. If you don’t have one, you probably should.

Supplied with an industrial self-adhesive Velcro hook and loop fastening to allow it to be easily added and removed from the gun. For a more permanent mount we suggest 3M Licence Plate double-sided foam tape (not supplied).

Check out the newer Reflex Option 3 loader here

Note: the standard Option 3 Loader is designed for right-handed guns. If you require one for a left-handed gun (ejection from the left-hand side), please leave a note in the order.

• Range Of Sizes
• Hyper-lightweight
• Increase Sight Radius
• Increase Precision

Improve your iron sight shooting with our barrel-mounted picatinny rail (NATO spec). Mounting your front sight further forward with our mount will give you a larger sight radius improving precision.

17mm - 16.5-17.1mm barrels (designed specifically for the standard 15-22 barrel and will match the OEM height of the receiver rail)

19.1mm (3/4") - 18.5-19.1mm barrels (confirmed fitment for the Tippmann M4-22, Kriss Defiance and 15-22 Performance Centre barrels)

25.4mm (1") - 24.8-25.4 barrels

Different barrel size than listed please contact us: info@magload.co.uk Lifetime warranty as standard. 

Note: Strictly for .22lr and .22 wmr use only 

Note: Sights not included

• Stainless Steel
• Set of 6 – Full, 3/4, 1/2, 1/4, 1/8, and Cylinder
• Laser Engraved Choke Selection Guide
• Extended For Easy Installation
• MTM Hard Case Included

Extended 12 gauge competition shotgun chokes made to our exact specification, available in the Crio Plus, Mobil, and Optima HP fitments. Each set contains 6 choke tubes to cover every scenario you'll likely find in IPSC, 3Gun, or any dynamic shooting competition, including; Full, 3/4 (Improved Modified), 1/2 (Modified), 1/4 (Improved Cylinder), 1/8 (Skeet), and Cylinder.

Stainless steel construction for all-weather performance and corrosion resistance. No choke key slot to keep muzzle smooth reducing flyers, taper on full length of choke tube for a more consistent pattern. Extended and knurled for easy and toolless installation. Magload lifetime warranty as standard.  

Choke Fitment Guide:

Crio Plus - Benelli M2, Benelli M2 SP, Benelli M2 SPEED, Benelli Nova SPEED, Benelli Montifeltro (2007 onwards), Benelli Cordoba (pre 2006), Benelli Ethos, Benelli Vinci, Benelli Super Black Eagle II & III, Benelli Super Sport, Benelli Ultralite, and Breda B12i

Mobil - Benelli Nova, Benelli Supernova, Benelli M1, Benelli M3, Benelli M4, Benelli Black Eagle I, Benelli Legacy, Benelli Montifeltro (pre 2007), Benelli Super Black Eagle I, Stoeger M3000, Stoeger M3500, Stoeger M3K, Franchi Infinity, Franchi Variomax, Franchi Affinity, Franchi I-12, Beretta A300, Beretta A301, Beretta A302, Beretta 303, Beretta A390, and Beretta 391.

Optima HP - Beretta A400, Beretta 1301, Beretta 1301 Comp Pro    

• Occupies the chamber to show the chamber is clear
• Suitable for all .223 chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Optional flag holder

Secure the action with the Magload breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel-locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro for easy mounting.

• Precision made polymer
• Temperature stable
• Regain your full sight adjustment range

This pack of 3x sight adjustment shims will allow you to dial in your Vortex red dot sight for bullet drop compensation and sight over bore issues.

Choose between the Razor fitment or Venom fitment.

Pack contains:

2x 0.5 degree shims

1x 1.0 degree shim

• Baseball cap design
• One size fits all
• Embroidered Magload logo
• Flex Fit or Velcro options

Show off your Magload pride with our official Magload baseball cap, or simply add it to your cap collection! One size fits all with velcro adjustment or Flex Fit.

• Polymer Construction
• Easier Latch Operation
• Drop-In Upgrade

Flick your holster lock on and off with ease with our enlarged holster lock lever, add a bit of flair and colour code your holster blocks too! 

Simple installation in under 2 minutes, no modification required and easily reversible.

Compatible with Double Alpha Racemaster and Alpha X holster blocks, please ensure your trigger guard does not extend out of the back of your block or the enlarged lever will foul.

• Ultra lightweight
• Optimised sight picture for IPSC
• Low profile
• Tough Polymer Construction

Purpose built flip-up sights for IPSC/USPSA rifle and mini rifle, low profile and ultra lightweight. Ideal for a first set of primary IPSC sights or backup/offset sights. With both front and rear sights being elevation and windage adjustable you can find the perfect position for your eye and cheek weld. Front Sight:

• Ultra-lightweight 14.8g
• NATO / Picatinny rail mount
• Pro P4 style post, 2.5mm post with 1.5mm aperture, always in the centre of the hood
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

Rear Sight:

• Ultra-lightweight 14.2g
• NATO / Picatinny rail mount
• 1.75mm aperture with single light trap
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

45 Degree Offset

• Same sights as above
• Front 16.5g, rear 15.9g
• Calculated sight position to be a perfect 45 degree rotation from the centre of the bore

Want to buy someone a gift but no idea what to get them? Let them choose with a MAGLOAD digital gift card! Never expires, and reusable!

• 2x 1.1kg release force magnets
• Solid shell retention
• Smooth load of the first shot
• Stays clear for all loading techniques

The Primus loader is a wrist mounted Option 3 (empty start) loader for when the start condition states “no ammunition on the gun”, letting you get the first round loaded as quickly as possible from your wrist or arm. 

With practice, you can load that first shot with a similar movement to a regular Option 3 Loader. Magnets and geometry retain the cartridge securely, yet the directional release lets you drop the round smoothly into the chamber. 

The loader is designed with a low profile and special geometry so that it will not impede smooth quad loading. Lightweight custom blend polymer and a genuine Velcro strap.

“A quick one off the wrist” as recommended by Dave Smith, Rossendale

Lifetime warranty as standard.

• Scaled down version of our 12g Shot Saver
  

• Ensure your keys always have that final saving shot

This is the last keyring you will ever need. It’s a scaled down version of a real Magload Shot Saver, made in exactly the same way on the same machines. It’ll even hold a round of ammunition, but which calibre you’ll have to discover for yourself… 

Display MAGLOAD proudly wherever you go, as long as you don’t forget your keys!