• Occupies the chamber to show the chamber is clear
• Suitable for all .22 chambers
• Rail mount for when not in use
  
• Optional flag holder

Secure the action with the rail mount .22 breech flag! Designed to stand off from the bolt face to protect your extractor and a relief cut on the underside to protect barrel mounted ejectors, such as the one on a Smith and Wesson M&P 15-22.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection, or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

• 45-degree reduced throw
• High-quality polymer construction
• Ambidextrous
• Long and short levers included

Reduce the throw of your safety to 45 degrees to increase speed and ease of operation. Fully ambidextrous for both right and left-handed setups.

The control surfaces are plastic, so they keep a consistent temperature whether in cold or hot weather and stay grippy when wet in the rain. Manufactured using high-quality polymer, reinforced with a brass thread insert, with a choice of long or short offhand levers, you can be ready to go with a Magload 45-degree safety.

Compatible with all mil-spec AR15s, the Kriss Defiance and Gen 3 (serial numbers 18,000 and above) Tippmann M4-22.

Lifetime warranty as standard.

• Fits All AR-15s, 15-22, Kriss Defiance & Tippmann M4-22
• Low Profile Left Side Button
• Oversized Right Side Button
• 3 Button Styles Included (Flat, Curved and Honeycomb)
• Drop-In Upgrade No Modification Necessary

The Magload ambidextrous magazine catch is compatible with ALL mil-spec AR-15 lowers, including the Smith & Wesson 15-22, Kriss Defiance, and Tippmann M4-22. 3 different omnidirectional button shapes are included to suit you and your rifle (flat, curved, and honeycomb), treat yourself to a variety of colour choices.

This ambi mag release gives you a low-profile left-hand button and an oversized right-hand button that can be pushed from multiple directions.

Dual screw design for easy and secure fitment. Fit within seconds with absolutely no modification necessary and all tools included. Lifetime warranty as standard.

• Fits All AR-15s, 15-22, Kriss Defiance & Tippmann M4-22
• Oversized Right Side Button
• 3 Button Styles Supplied (Flat, Curved and Honeycomb)
• Drop-In Upgrade No Modification Necessary

The Magload enlarged AR15 magazine release button set is compatible with ALL mil-spec AR-15 lowers, including the Smith & Wesson 15-22, Kriss Defiance, and Tippmann M4-22.

3 different omnidirectional button shapes, oversized that can be pushed from multiple directions, are included to suit you and your rifle (flat, curved, and honeycomb), treat yourself to a variety of colour choices.

Dual screw design for easy and secure fitment.

Fit within seconds with absolutely no modification necessary and all tools included!

• Ultra lightweight
• Optimised sight picture for IPSC
• Low profile
• Tough Polymer Construction

Purpose built flip-up sights for IPSC/USPSA rifle and mini rifle, low profile and ultra lightweight. Ideal for a first set of primary IPSC sights or backup/offset sights. With both front and rear sights being elevation and windage adjustable you can find the perfect position for your eye and cheek weld. Front Sight:

• Ultra-lightweight 14.8g
• NATO / Picatinny rail mount
• Pro P4 style post, 2.5mm post with 1.5mm aperture, always in the centre of the hood
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

Rear Sight:

• Ultra-lightweight 14.2g
• NATO / Picatinny rail mount
• 1.75mm aperture with single light trap
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

45 Degree Offset

• Same sights as above
• Front 16.5g, rear 15.9g
• Calculated sight position to be a perfect 45 degree rotation from the centre of the bore

• Occupies the chamber to show the chamber is clear
• Suitable for all .223 chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Optional flag holder

Secure the action with the Magload breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel-locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro for easy mounting.

• Purpose made for the Schmeisser SP-9 and AR15-9
• Hyper lightweight polymer
• Secure retention

Enlarged magwell for the Schmeisser SP-9 and AR15-9. Hyper lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by single bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Lifetime guarantee as standard.