• Purpose made for the S&W 15-22
• Hyper lightweight polymer
• Secure retention

A slimmed down version of our popular PRO magwell, our 15-22 Element Magwell gives you the same ease of loading without the cutout and enlarged flares of the PRO for a sleeker look. Designed for the Smith and Wesson 15-22 rifle, significantly decrease your reload times, giving you the competitive edge.

Hyper lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Lifetime guarantee as standard.

• Effortless reloads

• Cut out for D60/D50 compatible

• Hyper-lightweight polymer construction

• Secure retention

Flared magwell for the JP Enterprises CTR-02 with internal geometry to make reloads effortless. Hyper-lightweight, self-lubricating polymer construction that will never slow you down. Compatible with Magpul D60/D50 drum magazine.

Security is ensured by dual bolt fastening. 

Backed by the Magload lifetime guarantee.

• Strong polymer construction
• Zero modification, fully reversible
• Ergonomic design
• 4 stainless steel bolt locking
• Can be individually numbered/marked

Our bases are ergonomically designed for better grip whilst loading and unloading, the bases add significantly more grab space to make loading as easy as possible. The Ruger 10/22 Magazine Base design stems from the needs of top-level Speed Steel and Steel Challenge competitors. Available individually or in a pack of 6. 

To fit, push the base on, aligning the tab on the base to the tab on the magazine. Screw-in two diagonally opposed screws, the first screw won't bite but the second screw will. Then tighten the other two screws.

If you would like to mix and match colours within the 6x bundle please leave a note on the order

As standard, our bases come with the Magload lifetime warranty.

• +6rd extension
• Highly durable and lightweight polymer
• Stackable (with correct spring)

Tested and developed with Rifle World Champion Jarkko Laukia, our +6rd PMAG extensions will fit all Gen M3 PMAGs and extend their capacity by 6 rounds.

Made out of durable and lightweight polymer. Fixed by a secure, strong single screw lock. Compatible with Ranger bases and similar accessories.

The extensions can be stacked to fine tune your mag length for a stage if needed. Generally, the stock spring in a magazine is good for 1x extension, so if you have a 20 round mag and you extend it to 32, you need a spring from a 30 round mag. This would in theory enable you to add a third extension with this same spring.

(Magazine & spring not included)

• Carbon Fibre Tube
• Nylon Nut and End Cap
• Starting from just 95g in Weight
• Designed Specifically for the 15-22
• Certified M-LOK Slots Available
• Handguard Removal Tool Sold Separately Here

Specifically designed for the Smith & Wesson M&P 15-22, compatible with all versions. 

Super lightweight with our 11" M-LOK version coming in at a mere 95g! The standard 15-22 Sport handguard for comparison weighs 155g. 

Designed to have a factory fit to minimise flex issues that are so common with AR-15 conversion nuts, and to isolate as much of the handguard movement from the barrel as possible.

Precision machined certified M-LOK slots for maximum versatility, licensed by Magpul. Our handguards have an outer diameter (OD) of 45mm and inner diameter (ID) of 38mm.

Note: Handguard removal tool sold separately here.

Note: The handguard measurements are exactly 10.7" for the 11" version and 14.7" for the 15" version. This is to give you clearance for any muzzle accessories.

• +7rd extension gives you 17rds total
• Highly durable and lightweight polymer
• Base and follower kit
• +6 extensions for 25 round magazines available here

Easily increase your Smith & Wesson M&P 15-22 10-round magazine from 10 rounds to 17 rounds with our +7 extension base. This enables you to maximise the rounds in the magazine while still being low-profile enough to go prone.

The minimal added length is enough to get in and out of a magwell comfortably, while the extra weight encourages it to drop free when released. High durability and low friction polymer construction.

It is recommended to use an external load assist device with this kit, as the original load assist button is no longer used.

Note: Compatible with 10-round 15-22 magazine only, 25-round extensions can be found here.

Note: Magazine not included

• Enlarged and flared for the fastest reloading possible
• Designed specifically for the unique BAD receiver design
• Hyper-lightweight polymer construction
• Secure clamshell retention

Enlarged and flared magwell for the unique Battle Arms Development receiver design. Including the Authority Elite, OIP, and Ambi. Featuring geometry for maximum compatibility with the Magpul D60/D50 drum magazine!

Hyper-lightweight, self-lubricating polymer will never slow you down. Security is ensured by a dual bolt fastening clamshell design. 

Each magwell is hand-checked and comes with a lifetime guarantee!

• Hyper-lightweight
• Designed specifically for .22lr and .22 WMR
• Available in 1/2x20 UNF and 1/2x28 UNEF threads
• Available in 3/4" and 1" sizes

We took compensator science back to its roots to use the small amount of gas produced by a .22 round, bringing you a compensator that will keep your muzzle perfectly flat.

SLS printed to create geometry that’s impossible to machine, keep weight down, and make it economically priced. 

Both 3/4" and 1" brakes come with a timing nut for proper alignment with the barrel.

Available in 1/2x20 UNF and 1/2x28 UNEF threads.

• UNEF fits most AR-15 type .22 rifles - We can confirm the Smith and Wesson 15-22, Kriss Defiance, and Tippman M4-22 have 1/2x28 UNEF threads.

• UNF fits most other .22 rifles - We can confirm the Ruger 10/22 has 1/2x20 UNF threads.

Torture tested with a rapid 500 rounds and guaranteed for 10,000 rounds:

• Precision made polymer
• Temperature stable
• Regain your full sight adjustment range

This pack of 3x sight adjustment shims will allow you to dial in your Vortex red dot sight for bullet drop compensation and sight over bore issues.

Choose between the Razor fitment or Venom fitment.

Pack contains:

2x 0.5 degree shims

1x 1.0 degree shim

• Purpose made for the S&W 15-22
• Cut out for drum mag
• Hyper lightweight polymer
• Secure retention

Designed from the ground up for the Smith and Wesson M&P 15-22 rifle to significantly decrease your reload times.

Featuring cutouts for the Black Dog Machine drum magazines and additional flares over the Element Magwell, the PRO is designed for ultimate performance.

Hyper-lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag, as little as possible to catch or snag!

Lifetime warranty as standard.

• Fits All AR-15s, 15-22, Kriss Defiance & Tippmann M4-22
• Low Profile Left Side Button
• Oversized Right Side Button
• 3 Button Styles Included (Flat, Curved and Honeycomb)
• Drop-In Upgrade No Modification Necessary

The Magload ambidextrous magazine catch is compatible with ALL mil-spec AR-15 lowers, including the Smith & Wesson 15-22, Kriss Defiance, and Tippmann M4-22. 3 different omnidirectional button shapes are included to suit you and your rifle (flat, curved, and honeycomb), treat yourself to a variety of colour choices.

This ambi mag release gives you a low-profile left-hand button and an oversized right-hand button that can be pushed from multiple directions.

Dual screw design for easy and secure fitment. Fit within seconds with absolutely no modification necessary and all tools included. Lifetime warranty as standard.

• 45 degree reduced throw
• High-quality polymer construction
• Ambidextrous
• Long and short levers included

Reduce the throw of your Smith and Wesson M&P 15-22 safety to 45 degrees, increasing the speed and ease of operation. Fully ambidextrous for both right and left-handed setups.

The control surfaces are plastic, so they keep a consistent temperature whether in cold or hot weather and stay grippy when wet in the rain. Manufactured using high-quality polymer, reinforced with a brass thread insert, with a choice of long or short offhand levers.

Lifetime warranty as standard.

• Lightweight polymer construction
• Single finger operation
• Zero modification, fully reversible drop-in part
• Separate bolt release lever

An extended magazine release that allows you to drop a magazine with one finger from your firing hand, while using the other to grab your next magazine for a blisteringly fast reload.

We incorporate an extra control to operate the factory bolt stop which won’t interfere with normal function. No modification is required, a drop in replacement for your factory Ruger 10/22 .22 rifle or pistol.

Note: The colour selection is for the bolt stop control only, the main lever is supplied black as standard.