The Clic belt clip system is designed specifically for IPSC, 3 Gun and USPSA disciplines to be rock solid on the belt, with the QRB 1.5" or QRB 2.0" accessories becoming quick and easy to remove with the quick-release function. Clic takes up the absolute minimum amount of space, so you can stack them close together if needed, giving you additional room for belt accessories.

There are 4 options of bases, the Solo, QRB 1.5", QRB 2.0", or QRB Velcro:

• Clic Solo - For permanent attachment of accessories.
• Clic QRB 1.5" - Quick release base for standard 1.5" 2-part IPSC belts.
• Clic QRB 2.0" - Adjustable quick-release base for any 1.0"-2.0" belts in 0.25" increments with supplied spacers.
• Clic QRB Velcro - Velcro mounted QRB base for velcro competition belts, velcro applied as standard, screw holes available for fixed mount.

For both QRB bases, there is a range of compatible different-size mounting plates for any application:

• The single-row QRS plate is for all MAGLOAD loaders and other accessories like magazine pouches, with 3x bolt holes.
• The triple-row QRT plate is for people who are moving to this system from a Tek Lok or Hoppner & Schumann belt clip and want the same layout.
• The ball joint QRA plate is for angle-adjustable single-hole mounting such as magazine pouches. Designed specifically for the Double Alpha XiP and Race Master pouches
• The Clic One plate is one plate to fit on all QRB bases, one slot for adjustability and versatility, sized for the QRB 2.0".

Clic uses captured nuts for easy assembly. The clips can be used with hex bolts instead of nuts should you want threaded studs, and can be configured in many ways to suit what you need. All the hardware we supply is marine-grade stainless steel for maximum weather protection. Solo is 60x24mm, 14.5mm deep, and sits 5.5mm from the belt. QRB 1.5" is 60x24mm, 16.5mm deep, and sits 7.5mm from the belt. QRB 2.0" is 72x24mm, 20mm deep, and sits 11mm from the belt. All clips and Solo come with 2x nuts, 2x bolts, and 2x spacers.

• Stiff, rigid with little flex

• Two-part velcro design

• Compatible with CLIC, Double Alpha, Tek Lok and Safariland Belt Clips

• 1.5" Width, rectangular profile

• CLIC security buckle and Magload PVC patch included

Designed from the ground up to be the stiffest, lightest two-piece shooting belt on the market, giving superb support to any accessories you want to mount. Perfect for IPSC, USPSA, 3 Gun, and other competitive shooting disciplines. 

"The Stiffy" 2-part IPSC belt is 1.5" wide and only 0.25" thick, making it compatible with CLIC, Tek Lok, Double Alpha, and Safariland belt clip systems. Ideal for handgun, rifle or shotgun shooting. The two-part design uses the highest quality Velcro to ensure a secure attachment every time. Featuring a 5.5" strip of velcro on the front section for any patches.

The inner belt features a chamfer for easy threading through belt loops, a 1mm polymer reinforcing layer for added stiffness and only 3.25mm thick, comfortably worn over any trouser belt. The outer belt also features a chamfer for easy threading through belt loops, a rectangular profile for accessory stability, a strong 4mm polymer reinforcing core and maximum velcro availability on the back. Included with each belt are a CLIC security buckle and a Magload PVC morale patch. Available sizes are:

• 105cm - (Fits waist size 26-35") - 284g
• 121cm - (Fits waist size 32-41") - 312g
• 136cm - (Fits waist size 38-47") - 325g
• 151cm - (Fits waist size 43-53") - 399g
• 176cm - (Fits waist size 51-63") - 456g

• Durable Kydex Construction
• Adjustable Retention
• Versatile Ambidextrous Mounting Slots
• Clic Belt Clips Available Here

Designed specifically for IPSC, 3 Gun and USPSA disciplines to offer secure and reliable retention for your rifle magazines.

Currently available are; - S&W 15-22 Pouch: Compatible with our AR-22 magazines (without adapters fitted) and 15-22 magazines. - AR-15 Mil-Spec Pouch: Compatible with our AR-22 magazines (with adapters fitted) and mil-spec magazines (tested with all PMAG, Kriss DMK, Tippmann M4-22, Blackdog, Lancer, Stanag).

Moulded Kydex construction, from P1 2mm Kydex T, with rubber washers for adjustable retention. Each pouch features mounting slots on both sides for attaching to a range of belt clips including Tek Lok, Safariland ELS, and our own CLIC system. Offering up to 45 degrees of angle adjustment on the belt clip. We recommend using our CLIC Drop Link to lower the magazine for a more ergonomic grab and either a CLIC SOLO for a static mount or a CLIC QRB + QRS for quick-release mounting.

Lifetime warranty as standard.

Note: Belt clip attachments are sold separately here. For a static mount, we recommend a Clic Solo, for quick detach, we recommend a CLIC QRB + QRS. In addition to either we would also recommend a CLIC Link to lower the pouches from the belt for a more ergonomic grab.

Quick detach CLIC breech flag holders for 12g or .22lr and .223 breech flags, both can also be used as convenient glasses holders! Quickly switch between breech flag holders with CLIC. Compatible with the Magload Clic system, will require a CLIC QRB belt clip attachment or CLIC Security Buckle. 

• CLIC 12g Holder fits Magload 12g flags
• CLIC .22/.223 Holder fits Magload .22 and .223 flags

Click here for the Quick Release Base this clip attaches to.

*flag not included unless selected as an option

• Occupies the chamber to show the chamber is clear
• Suitable for all .223 chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Optional flag holder

Secure the action with the Magload breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel-locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro for easy mounting.

• Occupies the chamber to show the chamber is clear
• Suitable for all .22 chambers
• Rail mount for when not in use
  
• Optional flag holder

Secure the action with the rail mount .22 breech flag! Designed to stand off from the bolt face to protect your extractor and a relief cut on the underside to protect barrel mounted ejectors, such as the one on a Smith and Wesson M&P 15-22.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection, or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.