The Clic belt clip system is designed specifically for IPSC, 3 Gun and USPSA disciplines to be rock solid on the belt, with the QRB 1.5" or QRB 2.0" accessories becoming quick and easy to remove with the quick-release function. Clic takes up the absolute minimum amount of space, so you can stack them close together if needed, giving you additional room for belt accessories.

There are 4 options of bases, the Solo, QRB 1.5", QRB 2.0", or QRB Velcro:

• Clic Solo - For permanent attachment of accessories.
• Clic QRB 1.5" - Quick release base for standard 1.5" 2-part IPSC belts.
• Clic QRB 2.0" - Adjustable quick-release base for any 1.0"-2.0" belts in 0.25" increments with supplied spacers.
• Clic QRB Velcro - Velcro mounted QRB base for velcro competition belts, velcro applied as standard, screw holes available for fixed mount.

For both QRB bases, there is a range of compatible different-size mounting plates for any application:

• The single-row QRS plate is for all MAGLOAD loaders and other accessories like magazine pouches, with 3x bolt holes.
• The triple-row QRT plate is for people who are moving to this system from a Tek Lok or Hoppner & Schumann belt clip and want the same layout.
• The ball joint QRA plate is for angle-adjustable single-hole mounting such as magazine pouches. Designed specifically for the Double Alpha XiP and Race Master pouches
• The Clic One plate is one plate to fit on all QRB bases, one slot for adjustability and versatility, sized for the QRB 2.0".

Clic uses captured nuts for easy assembly. The clips can be used with hex bolts instead of nuts should you want threaded studs, and can be configured in many ways to suit what you need. All the hardware we supply is marine-grade stainless steel for maximum weather protection. Solo is 60x24mm, 14.5mm deep, and sits 5.5mm from the belt. QRB 1.5" is 60x24mm, 16.5mm deep, and sits 7.5mm from the belt. QRB 2.0" is 72x24mm, 20mm deep, and sits 11mm from the belt. All clips and Solo come with 2x nuts, 2x bolts, and 2x spacers.

• Stiff, rigid with little flex

• Two-part velcro design

• Compatible with CLIC, Double Alpha, Tek Lok and Safariland Belt Clips

• 1.5" Width, rectangular profile

• CLIC security buckle and Magload PVC patch included

Designed from the ground up to be the stiffest, lightest two-piece shooting belt on the market, giving superb support to any accessories you want to mount. Perfect for IPSC, USPSA, 3 Gun, and other competitive shooting disciplines. 

"The Stiffy" 2-part IPSC belt is 1.5" wide and only 0.25" thick, making it compatible with CLIC, Tek Lok, Double Alpha, and Safariland belt clip systems. Ideal for handgun, rifle or shotgun shooting. The two-part design uses the highest quality Velcro to ensure a secure attachment every time. Featuring a 5.5" strip of velcro on the front section for any patches.

The inner belt features a chamfer for easy threading through belt loops, a 1mm polymer reinforcing layer for added stiffness and only 3.25mm thick, comfortably worn over any trouser belt. The outer belt also features a chamfer for easy threading through belt loops, a rectangular profile for accessory stability, a strong 4mm polymer reinforcing core and maximum velcro availability on the back. Included with each belt are a CLIC security buckle and a Magload PVC morale patch. Available sizes are:

• 105cm - (Fits waist size 26-35") - 284g
• 121cm - (Fits waist size 32-41") - 312g
• 136cm - (Fits waist size 38-47") - 325g
• 151cm - (Fits waist size 43-53") - 399g
• 176cm - (Fits waist size 51-63") - 456g