-
Shop By Make & Model
- Shop By Make & Model
-
Armsan
-
Battle Arms Development
-
Benelli
-
Beretta
-
Breda
-
Calibre Innovations
-
Chiappa
-
CMMG
-
Franchi
-
GSG
-
Grand Power
-
Hatsan
-
JP Enterprises
-
Kriss
-
Lantac
-
Molot
-
Mossberg
-
Nordic Components
-
Remington
-
Ruger
-
Schmeisser
-
Sig Sauer
-
Smith & Wesson
-
Stoeger
-
Tippmann
-
Walther
-
Shop By Category
- Shop By Category
-
Shotgun
-
Rifle
-
Handgun
-
Accessories
Your cart
9 products
9 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
From £59.99
- Extremely light and predictable pull
- High and adjustable retention
- Lightest self-adjusting loader in the world, from 92g
- Velcro Competition Belt Available Here
- Huge variety of mounting and assembly options
- Tool-free self-adjustment for all usable cartridge lengths
The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!
The Nexus PRO quadloading system is our ultimate loader, lighter than any other spring adjustable loader on the market. Completely UK made, set-and-forget, left and right-handed shotgun cartridge caddy in 4, 8, 12, 14, 16, 20, 24, 28, and 32 options.
The Nexus PRO comes with:
- Your loader
- PS51 Industrial Velcro, cut to size, with an alcohol swab
- Belt clip spacers
- 10mm and 5mm spring adjustment spacers
We recommend a full belt setup would be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages. Note: Velcro Competition Belt or belt clips are sold separately.
DESCRIPTION
Nexus PRO is a set and forget system which will take any cartridge with an unfired length from 50-67.5mm (most manufacturers will quote the fired cartridge length in their technical date). That means any cartridge, bird, buck or slug that you would use in training or competition will fit in the Nexus PRO system with no further adjustment. The Nexus system can be set up either left or right-handed and changed at any time using just one Allen key. The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!
The Nexus PRO is built with IPSC and USPSA in mind and therefore conforms perfectly to IPSC and USPSA rules, but the Nexus PRO is even more suitable to 3 Gun and other disciplines than ever before. Competitors have been using the Nexus PRO in it's 4up and 8up configurations with great success in 3 Gun and other multigun disciplines.
Versatility
- Can be set up right or left-handed
- Load twins or quads whenever you want
- Self adjusts to fit any cartridge used in dynamic shooting
- Can be fitted to CLIC, Tek Loks, ELS clips or our Velcro Competition belt
- Fully Modular
- Adjustable spring tension and hand clearance
- 4, 8, 12, 14, 16, 20, 24, 28, and 32 round configurations available
Construction
- Aerospace-grade aluminium backplate, hard anodised
- The Nexus PRO is just 50mm from front to back, including cartridges (49mm without). There is no danger of exceeding the IPSC 75mm rules even with a loose belt or a thick attachment mechanism (Tek Lok or Velcro).
- The plastic parts are made using the latest in 3D manufacturing technology. From -50 degrees C, to 150 degrees C; the Nexus PPRO will always work as you expect it to!
- Minimal maintenance is required. Self-cleaning even through the thickest of mud and sand.
- We are using the latest in materials technology to utilise spring systems that will be long lasting and corrosion-free.
Easy to use
- The Nexus PRO can be supplied in a ready-to-assemble state with clear and comprehensive instructions or assembled for you in a right or left-handed configuration.
- Set and forget. Once the loader is assembled it never needs to be adjusted as it will self adjust to any usable cartridge length.
- Low release force and natural release directions.
- When emptied of ammo the loader collapses down to the smallest possible footprint. An empty loader will not get in the way during bending, crouching or any other form of PSG acrobatics.
Weights: PRO4 92g, PRO8 178g, PRO12 265g, PRO14 305g, PRO16g 354, PRO20 428g, PRO24 527g, PRO28 617g, PRO32 695g
As standard, the Nexus PRO comes with our lifetime warranty.
From £79.99
- High retention cupped bases and double magnets
- Extremely consistent and predictable pull
- Re-configurable between left and right hand
- High-grade aluminium backplate and bars
- Modular and upgradeable
- Tool-free self-adjustment for all usable cartridge lengths
- Lifetime warranty
Our next-generation Nexus Element Gen II shotgun caddies are focused on retention without compromising your load. Featuring double magnets and cupped bases to grip when it matters. Gen II moves to aluminium backplates and bars, producing the lightest loader we have ever made! Completely UK-made, set-and-forget, switchable between left or right-hand, and available in 8, 12, 20, 28, and 32 options.
The Nexus Element Gen II comes with:
- Your loader
- PS51 Industrial Velcro, cut to size, with an alcohol swab
- Belt clip spacers
We recommend a full belt setup should be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages.
Nexus Element Gen II is a set and forget system that takes any cartridge with an unfired length from 51-67.5mm (most manufacturers quote the fired cartridge length). That means any cartridge, bird, buck, or slug you would use in training or competition will fit in the Nexus system with no further adjustment. You don't have to commit to loading either right or left-handed, it takes just 10 minutes to convert an assembled Nexus 12 from one hand to the other.
In line with MAGLOAD ethos, the Nexus Element Gen 2 is versatile, well built, easy to use, and is the most affordable system on the market. Compliant with all IPSC and 3 Gun competition rules.
Versatility
- Can be set up right or left-handed. All Nexus Element Gen IIs will be supplied assembled. Your loader can be easily reconfigured between right and left-handed setups.
- Load twins or quads whenever you want.
- Set and forget. Once the loader is assembled, it never needs to be adjusted as it will self adjust to any usable cartridge length and any cartridge on the IPSC or 3 Gun circuit.
- Can be fitted to CLIC, Tek Loks, ELS clips or used with our Velcro Competition belt.
- When empty, the loader collapses to the smallest possible footprint. An empty loader will not get in the way during bending or crouching.
- Low release force and natural release directions.
Construction
- Nexus Element Gen II backplate and bars are constructed from hard anodised aluminium.
- Sintered Nylon 12 tops, bushings and bases. There are no practical limits to the heat or cold to which they can be exposed.
- Long lasting and corrosion-free springs.
As standard, the Nexus Element Gen II comes with our lifetime warranty.
£109.99
- Secure and easy to use buckle
- Rapid fastening and adjustment
- Premium 6mm thick rubber and cork construction, with a grippy inner surface and genuine Velcro outer
- Compatible with all Nexus and Reflex loaders
SIZING: Measure around where you will wear the belt (around the belly button) + clothes and order the largest belt that will fit you.
The sizes accommodated are:
- Small 26-44" (18" of belt space)
- Medium 34-54" (26" of belt space)
- Large 42-60" (32" of belt space)
Everyone knows how to use a seat belt, and everyone knows how secure a seat belt is. Quick to fasten and quick to adjust. Avoid the faux pas of a belt coming off in IPSC, USPSA and 3 Gun competition by using the MAGLOAD Velcro Competition Belt.
Using our proprietary rubber and cork core construction, we’ve thinned this belt down to a mere 6mm, further reducing weight and increasing your range of movement without sacrificing rigidity for your loaders. 100mm wide genuine Velcro ensures that your loaders and accessories stay where you put them.
Supplied with a Magload PVC Patch and an integrated elastic strap to secure excess webbing.
Nexus PRO loaders are sold separately here
Nexus Element Gen II loaders are sold separately here
Breech Flag and Holder are sold separately here
Note: for the Small size belt, we recommend a maximum two-loader set-up of a 12 and 24, or up to a single 32. Medium and Large sizes will comfortably fit a two-loader set-up of up to a 14 and 32.
£27.99
- Single Nexus PRO module ( 2 cartridges )
- Additional Backplates Are Available Here
A single Nexus PRO module ( 2 cartridges ) for increasing capacity and upgrading your existing loader. Supplied in each pack:
- 1 x Nexus PRO Top
- 1 x Nexus PRO Bushing
- 1 x Nexus PRO Bottom
- 1 x Spring
- 1 x Gold Anodised Aluminium Bar
- 3 x M4x14 Bolt
- 1 x M3x10 Bolt
Note: Additional Nexus PRO backplates can be purchased here.
£19.99
- Single Nexus Element Gen II Module ( 2 Cartridges )
- Additional Backplates Are Available Here
A single Nexus Element Gen II module ( 2 cartridges ) for increasing capacity and upgrading your existing loader.
Supplied in each pack:
- 1 x Nexus Element Gen II Top
- 1 x Nexus Element Gen II Bushing
- 1 x Nexus Element Gen II Bottom
- 1 x Spring
- 1 x Aluminium Bar
- 3 x M4x14 Screw
- 1 x M3x10 Screw
Note: Additional backplates can be purchased here
From £11.99
- Hyper lightweight Nexus PRO backplate and bars
- Easy and fast upgrade for the original Nexus and Nexus Element Gen I
Shed significant weight, up to 50%, from your original Nexus and Nexus Element Gen I loader or change the size of your Nexus Pro and Nexus Element Gen II by upgrading it with the Nexus PRO backplate and bars!
Living up to the modularity of the Nexus system, the Nexus PRO components are 100% backwards compatible with the original Nexus and Nexus Element Gen I. Made from aerospace grade aluminium, the bars and backplate also have a hard anodised finish.
From £19.99
- Stainless Steel Nexus Element backplates
- Compatible with original Nexus, Nexus Element, Nexus Element Gen II and Nexus Pro
Combine or split out your Nexus Element modules to a new size with additional backplates. Living up to the modularity of the Nexus system, the Nexus Element backplates are 100% backwards compatible with the Original Nexus and Nexus Pro also.
Made from high-grade stainless steel, with a linished finish.
£1.99
- 1x 10mm & 1x 5mm spacer
- Easy and fast adjustment
- Adjust hand space
- Adjust spring tension
- Compatible with all Nexus loaders
Additional adjustment spacers to configure your spring tension or hand spacing. The Nexus PRO already supplied with these spacers. You can buy additional spacers here for added hand space, spring tension, or to add to your Nexus Element Gen I and Gen II.
1x 10mm & 1x 5mm spacer per kit. If you need these extra spacers for a whole loader, the quantities are:
- Nexus 4: 2x sets
- Nexus 8: 4x sets
- Nexus 12: 6x sets
- Nexus 14: 7x sets
- Nexus 16: 8x sets
- Nexus 20: 10 sets
- Nexus 24: 12 sets
- Nexus 28:14 sets
- Nexus 32: 16 sets
£5.99
- Increase Cartridge Retention
- Easy and fast fitment
- No Modification Required
- Compatible With Nexus Pro Loaders
Note: Only compatible with the Nexus PRO purchased prior to June 2025, as this option feature is supplied as standard in newer PRO. Maximise the retention of your Nexus Pro with the GRIP base insert.
The Nexus Pro was designed for the perfect balance between retention and consistent release. The GRIP bases are for those wanting more retention and a stronger release. The GRIP base cups the cartridge around the front, holding the stack with more force. This also counters the effects of poor and uneven crimping on cartridges that can cause an uneven stack. Clip the insert into place and secure it with the supplied screw. To fit GRIP bases to a whole loader, the quantities are:
- Nexus Pro 4: 2x bases
- Nexus Pro 8: 4x bases
- Nexus Pro 12: 6x bases
- Nexus Pro 14: 7x bases
- Nexus Pro 16: 8x bases
- Nexus Pro 20: 10x bases
- Nexus Pro 24: 12x bases
- Nexus Pro 28: 14x bases
- Nexus Pro 32: 16x bases
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.