• Extremely Light Weight –  Just 167g for our standard-length Benelli M2 option
• Proven Reliability
• High Strength Carbon Fibre
• Impact-Resistant Polymer
• Main Telescopic Spring Included
• Use Your Original Magazine Spring 

Our telescopic shotgun magazine tube has been developed over two years of continuous testing and refinement, resulting in unparalleled reliability and is significantly lighter than anything else on the market. Designed to shed weight from the place it affects you the most, resulting in faster transitions and easier gun manipulation by lowering the moving mass. Just 167g on a 380mm tube.

High-spec carbon fibre made to our specification with a premium matte finish. Our tubes are bonded using cutting-edge adhesives used in the automotive industry for sports car chassis.

The tubes are supplied with a single telescopic spring, engineered for performance with all our supplied lengths. No cutting, modifying, or trying different strengths, ready to go out of the box. Your main magazine spring, from a fixed-length tube can be reused without any modification, resulting in the same loading feel as before. 

Length-restricting internal spacer sets are available here to tune the maximum extended length, ensuring your exact shotgun configuration stays within the required 1320mm overall length. 

Main magazine spring is sold separately here.

Additional telescopic springs are available here.

Standard Length

Designed for maximum capacity with IPSC standard division where there are no maximum length restrictions or when no muzzle devices are fitted to the barrel. 

These lengths are a stock option and ready to ship with no manufacturing lead time.

For Benelli M1, M2 (all variants Field, SP, SPEED ect), and Super Black Eagle models, the collapsed length finishes flush with the muzzle on a 24" barrel with a collapsed length of 380mm (15"), extending to 644mm (25.35") for a total additional capacity of +9 rounds, 13 rounds total. 

For Beretta 1301 and A400 models, the collapsed length finishes flush with the muzzle on a 26" barrel with a collapsed length of 325mm (12.8"), extending to 527mm (20.75") for a total additional capacity of +8 rounds, 13 rounds total. 

For Benelli Nova SPEED, the collapsed length finished flush with the muzzle on a 24" barrel fitted with standard extended chokes. A collapsed length of 350mm (13.75"), extending to 591.5mm (23.3") for a total additional capacity of +9 rounds, 14 rounds total.

All capacities are based on a 60mm unfired cartridge length unless otherwise stated.

Custom Length

Want a shorter collapsed length to avoid interference with a muzzle brake, or want a larger capacity? Our custom length option ensures a tube is made to your exact specification. 

Below is our length and capacity guide, we can either make your tube to a specific length (+-2mm) or capacity. Please leave a note on your order or email us when placing your order to confirm your required specification. 

Custom lengths must be a minimum length of 290mm or a maximum length of 420mm.

NOTE: 2-3 weeks for manufacturing custom tubes. Each tube is made to order! Please read the specifications above. As these are custom tubes, we will not be able to accept returns.

NOTE: The extension tube will add to the internal standard capacity of the gun. For reference, a Beretta 1301 has a standard internal capacity (without an extension tube) of 5, and the Benelli M2 (all variants) has a standard internal capacity of 4. The total capacity of the gun would be the standard internal capacity plus the extension's capacity. For example, if you would like your Beretta 1301 to have a total capacity of 12, you would need a +7 tube. All known standard internal capacities are listed below.

• Benelli M2 (all variants) - 4 rounds
• Benelli M4 - 5 or 7 rounds (depending on variant)
• Benelli Nova - 5 rounds
• Benelli Nova SPEED - 5 rounds
• Benelli Supernova - 5 rounds
• Beretta 1301/Tactical - 5 rounds
• Breda B12i - 4 rounds
• Mossberg 940 / 930 - 4 rounds
• Mossberg 590 - 6-8 rounds
• Stoeger M3000 / M3K - 5 rounds
• Remington 870 - 4 rounds

For any help or recommendations, please don’t hesitate to get in touch using the Contact Us form.

• Streamlined profile for easier quad and dual loading
• Consistent and comfortable for any grip style or hand size
• Mounting holes for Shot Saver
• Compatible with Benell M2, M2 SP, and M2 SPEED, SBEII, and M1 Super 90
• Lightweight and strong polymer construction
• Cerakote finish for easy cleaning
• Drop-in fitment

Created with the optimal profile for quad and dual loading, removing the interfering ridge on the original forend. High grip design for maximum control in all conditions, finished with Cerakote H Series for unparalleled levels of hardness and resistance to solvents and wear.

Ergonomic design for comfort with any grip style, multiple grooves and ledges for full control regardless of your hand size. 

Drop-in fitment with no modifications required. Will require the use of original metal shims from the original handguard, tool supplied to remove and transfer. 

Compatible with all models of Benelli M2 (Pre 2023), M2 SP, M2 SPEED, SBEII, and M1 Super 90.

Lifetime warranty as standard.

• Streamlined profile for easier quad and dual loading
• Consistent and comfortable for any grip style or hand size
• Mounting holes for Shot Saver
  
• Lightweight and strong polymer construction
• Cerakote finish for easy cleaning
• Drop-in fitment

Made for the smoothest action, pump faster and more consistently with our high grip design for maximum control in all conditions, finished with Cerakote H Series for unparalleled levels of hardness and resistance to solvents and wear. Created with the optimal profile for quad and dual loading.

Ergonomic design for comfort with any grip style, multiple grooves and ledges for full control regardless of your hand size. 

Drop-in fitment with no modifications required. Extra security grub screw feature to retain pin. Will require the use of original metal pins from the original handguard, tool supplied to remove and transfer. 

Compatible with the Benelli Nova SPEED only. 

Lifetime warranty as standard.

• High retention cupped bases and double magnets
• Extremely consistent and predictable pull
• Re-configurable between left and right hand
• High-grade aluminium backplate and bars
• Modular and upgradeable
• Tool-free self-adjustment for all usable cartridge lengths
• Lifetime warranty

Our next-generation Nexus Element Gen II shotgun caddies are focused on retention without compromising your load. Featuring double magnets and cupped bases to grip when it matters. Gen II moves to aluminium backplates and bars, producing the lightest loader we have ever made! Completely UK-made, set-and-forget, switchable between left or right-hand, and available in 8, 12, 20, 28, and 32 options.

The Nexus Element Gen II comes with:

• Your loader
• PS51 Industrial Velcro, cut to size, with an alcohol swab
• Belt clip spacers

We recommend a full belt setup should be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages.

Nexus Element Gen II is a set and forget system that takes any cartridge with an unfired length from 51-67.5mm (most manufacturers quote the fired cartridge length). That means any cartridge, bird, buck, or slug you would use in training or competition will fit in the Nexus system with no further adjustment. You don't have to commit to loading either right or left-handed, it takes just 10 minutes to convert an assembled Nexus 12 from one hand to the other.

In line with MAGLOAD ethos, the Nexus Element Gen 2 is versatile, well built, easy to use, and is the most affordable system on the market. Compliant with all IPSC and 3 Gun competition rules.

Versatility

• Can be set up right or left-handed. All Nexus Element Gen IIs will be supplied assembled. Your loader can be easily reconfigured between right and left-handed setups.
• Load twins or quads whenever you want.
• Set and forget. Once the loader is assembled, it never needs to be adjusted as it will self adjust to any usable cartridge length and any cartridge on the IPSC or 3 Gun circuit.
• Can be fitted to CLIC, Tek Loks, ELS clips or used with our Velcro Competition belt.
• When empty, the loader collapses to the smallest possible footprint. An empty loader will not get in the way during bending or crouching.
• Low release force and natural release directions.

Construction

• Nexus Element Gen II backplate and bars are constructed from hard anodised aluminium.
• Sintered Nylon 12 tops, bushings and bases. There are no practical limits to the heat or cold to which they can be exposed.
•  Long lasting and corrosion-free springs.

As standard, the Nexus Element Gen II comes with our lifetime warranty.

• Ultra lightweight
• Optimised sight picture for IPSC
• Low profile
• Tough Polymer Construction

Purpose built flip-up sights for IPSC/USPSA rifle and mini rifle, low profile and ultra lightweight. Ideal for a first set of primary IPSC sights or backup/offset sights. With both front and rear sights being elevation and windage adjustable you can find the perfect position for your eye and cheek weld. Front Sight:

• Ultra-lightweight 14.8g
• NATO / Picatinny rail mount
• Pro P4 style post, 2.5mm post with 1.5mm aperture, always in the centre of the hood
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

Rear Sight:

• Ultra-lightweight 14.2g
• NATO / Picatinny rail mount
• 1.75mm aperture with single light trap
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

45 Degree Offset

• Same sights as above
• Front 16.5g, rear 15.9g
• Calculated sight position to be a perfect 45 degree rotation from the centre of the bore

• Highly configurable for your perfect sight picture
• Lockable elevation and windage with configurable 1/2, 1/4 & 1/8 MOA adjustments
• Return-to-zero lockable sight elements
• Auto-adjusting for backlash and wear

Purpose built sights for IPSC Mini Rifle, with a wealth of features specific to the discipline. Front Sight:

• Lightweight
• Direct barrel mount
• Fits 1", 3/4" and 11/16" barrels using included reducing collars (25.4mm, 19.05mm, 17.1mm), custom collars also available (Max 25.4mm)
• Supplied with 15 interchangeable return-to-zero post inserts (A1-A8, P1-P5, C1 & C2)
• Compatible with Magload return-to-zero metal sight elements (not supplied)
• Adjustable and lockable elevation, supplied with 1/8, 1/4 and 1/2 MOA adjustment dials
• Configurable for open hood, closed hood (tunnel) and with swappable window inserts to adjust light levels
• Hood is always concentric to the insert or element aiming point
• Auto-adjusting for backlash and wear
• Modular and upgradeable/repairable

Rear Sight:

• Lightweight
• NATO / Picatinny rail mount
• Supplied with 8 quick change, return-to-zero anti-glare sight tubes (1.2mm, 1.5mm, 1.75mm and 2.0mm in small and large tube sizes)
• Double light trap at the rear of the anti glare tubes for high contrast sight picture
• Sight tube lockable (some disassembly required)
• Ambidextrous windage dials, configurable for both left-only or right only
• Adjustable and lockable windage, configurable for 1/4 or 1/2 MOA adjustments
• Adjustable and lockable elevation, supplied with 1/8, 1/4 and 1/2 MOA adjustment dials
• Auto-adjusting for backlash and wear
• Modular and upgradeable/repairable

Front Pro Mini Rifle Rear Sight is pictured with the C2 sight post, inspired by IPSC Standard Rifle World Champion Sami Hautamaki. Both front and rear Pro Mini Rifle Sights are shipped with 1/4 MOA adjustments on all axes, and can be reconfigured with the supplied parts. Rear Pro Mini Rifle Sight is shipped in an ambidextrous configuration and can be reconfigured left/right with the included single sided lead screw. Front Sight Posts:

• Low Profile Mil-Spec Magwell

• D50/D60 Compatible

• Hyper lightweight polymer

• Secure retention

D50/D60 compatible low profile magwell for mil-spec AR-15 rifles. The low profile magwell maintains our tried and tested loading geometry in a smaller and lighter package to decrease your reload times significantly.

Hyper lightweight and constructed from self-lubricating polymer that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Each magwell is hand-checked and comes with a lifetime guarantee.