-
Shop By Make & Model
- Shop By Make & Model
-
Armsan
-
Battle Arms Development
-
Benelli
-
Beretta
-
Breda
-
Calibre Innovations
-
Chiappa
-
CMMG
-
Franchi
-
GSG
-
Grand Power
-
Hatsan
-
JP Enterprises
-
Kriss
-
Lantac
-
Molot
-
Mossberg
-
Nordic Components
-
Remington
-
Ruger
-
Schmeisser
-
Sig Sauer
-
Smith & Wesson
-
Stoeger
-
Tippmann
-
Walther
-
Shop By Category
- Shop By Category
-
Shotgun
-
Rifle
-
Handgun
-
Accessories
Your cart
7 products
7 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
From £2.99
- Low profile and compact
- Range of mounting options
- Quick release option
-
Supplied with stainless hardware
The Clic belt clip system is designed specifically for IPSC, 3 Gun and USPSA disciplines to be rock solid on the belt, with the QRB 1.5" or QRB 2.0" accessories becoming quick and easy to remove with the quick-release function. Clic takes up the absolute minimum amount of space, so you can stack them close together if needed, giving you additional room for belt accessories.
There are 4 options of bases, the Solo, QRB 1.5", QRB 2.0", or QRB Velcro:
- Clic Solo - For permanent attachment of accessories.
- Clic QRB 1.5" - Quick release base for standard 1.5" 2-part IPSC belts.
- Clic QRB 2.0" - Adjustable quick-release base for any 1.0"-2.0" belts in 0.25" increments with supplied spacers.
- Clic QRB Velcro - Velcro mounted QRB base for velcro competition belts, velcro applied as standard, screw holes available for fixed mount.
For both QRB bases, there is a range of compatible different-size mounting plates for any application:
- The single-row QRS plate is for all MAGLOAD loaders and other accessories like magazine pouches, with 3x bolt holes.
- The triple-row QRT plate is for people who are moving to this system from a Tek Lok or Hoppner & Schumann belt clip and want the same layout.
- The ball joint QRA plate is for angle-adjustable single-hole mounting such as magazine pouches. Designed specifically for the Double Alpha XiP and Race Master pouches
- The Clic One plate is one plate to fit on all QRB bases, one slot for adjustability and versatility, sized for the QRB 2.0".
Clic uses captured nuts for easy assembly. The clips can be used with hex bolts instead of nuts should you want threaded studs, and can be configured in many ways to suit what you need. All the hardware we supply is marine-grade stainless steel for maximum weather protection. Solo is 60x24mm, 14.5mm deep, and sits 5.5mm from the belt. QRB 1.5" is 60x24mm, 16.5mm deep, and sits 7.5mm from the belt. QRB 2.0" is 72x24mm, 20mm deep, and sits 11mm from the belt. All clips and Solo come with 2x nuts, 2x bolts, and 2x spacers.
From £39.99
- Polymer Construction
- Split Shell Screwed Design
- 31 Round Capacity
- Last Round Bolt Hold Open
- Enlarged Feedlips For Durability
- Designed For Reliability
- Adapters Available Here
- AR-22 Bolt Catch Available Here
The Magload AR-22 Magazine is designed from the ground up for competition .22lr AR-15 rifles, have increased reliability, increased durability, and increased capacity to 31 rounds as standard.
Enlarged feed lips and improved polymer blend to reduce wear, giving longer-lasting magazines. Split shell, screwed injection moulded design allowing disassembly for inspection and cleaning. Developed with and tested by some of the best shooters in the world.
Compatible with the S&W 15-22 and Better-Mag adapter-fitted rifles out of the box, with no adapters or additional accessories required. The magazine also features the ability to attach our proprietary AR-22 Adapters for compatibility with CMMG .22 converted rifles (without the Better-Mag adapter fitted), Tippmann M4-22, Kriss Defiance, JP Enterprises JP-22, and Nordic Components NC-22/RB-22.
Retain the last round bolt hold open with our AR-22 Bolt Catch, not required when using our magazines with the S&W 15-22 or Better-Mag adapter.
Easily load your AR-22 with either the Tippmann or McFadden Speed Loader. The McFadden loader requires our own specific adapters, either the #M0 or #M1, depending on the configuration. Both are available here.
Configuration Compatibility
- AR-22 Magazine Only - S&W M&P 15-22 and rifles fitted with a Better-Mag Adapter.
- AR-15 Adapter - All rifles using CMMG, BoreBuddy, Spikes, or Ciener .22lr bolts, without the Better-Mag Adapter.
- JP/Nordic Adapter - All rifles using JP Enterprises or Nordic Components .22lr bolts.
- Tippmann Adapter - All models of Tippmann Arms M4-22.
- Kriss Adapter - All models of Kriss Defiance DMK
NOTE: For orders to the USA the magazine must be ordered with an adapter fitted. 'AR-22 Magazine Only' configuration can not be shipped to the USA
NOTE: If you would like your magazine to be restricted to 10 rounds for regional compliance, please leave a note on your order.
Please don’t call it a charger or a clip, it’s a magazine!
From £59.99
- Extremely light and predictable pull
- High and adjustable retention
- Lightest self-adjusting loader in the world, from 92g
- Velcro Competition Belt Available Here
- Huge variety of mounting and assembly options
- Tool-free self-adjustment for all usable cartridge lengths
The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!
The Nexus PRO quadloading system is our ultimate loader, lighter than any other spring adjustable loader on the market. Completely UK made, set-and-forget, left and right-handed shotgun cartridge caddy in 4, 8, 12, 14, 16, 20, 24, 28, and 32 options.
The Nexus PRO comes with:
- Your loader
- PS51 Industrial Velcro, cut to size, with an alcohol swab
- Belt clip spacers
- 10mm and 5mm spring adjustment spacers
We recommend a full belt setup would be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages. Note: Velcro Competition Belt or belt clips are sold separately.
DESCRIPTION
Nexus PRO is a set and forget system which will take any cartridge with an unfired length from 50-67.5mm (most manufacturers will quote the fired cartridge length in their technical date). That means any cartridge, bird, buck or slug that you would use in training or competition will fit in the Nexus PRO system with no further adjustment. The Nexus system can be set up either left or right-handed and changed at any time using just one Allen key. The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!
The Nexus PRO is built with IPSC and USPSA in mind and therefore conforms perfectly to IPSC and USPSA rules, but the Nexus PRO is even more suitable to 3 Gun and other disciplines than ever before. Competitors have been using the Nexus PRO in it's 4up and 8up configurations with great success in 3 Gun and other multigun disciplines.
Versatility
- Can be set up right or left-handed
- Load twins or quads whenever you want
- Self adjusts to fit any cartridge used in dynamic shooting
- Can be fitted to CLIC, Tek Loks, ELS clips or our Velcro Competition belt
- Fully Modular
- Adjustable spring tension and hand clearance
- 4, 8, 12, 14, 16, 20, 24, 28, and 32 round configurations available
Construction
- Aerospace-grade aluminium backplate, hard anodised
- The Nexus PRO is just 50mm from front to back, including cartridges (49mm without). There is no danger of exceeding the IPSC 75mm rules even with a loose belt or a thick attachment mechanism (Tek Lok or Velcro).
- The plastic parts are made using the latest in 3D manufacturing technology. From -50 degrees C, to 150 degrees C; the Nexus PPRO will always work as you expect it to!
- Minimal maintenance is required. Self-cleaning even through the thickest of mud and sand.
- We are using the latest in materials technology to utilise spring systems that will be long lasting and corrosion-free.
Easy to use
- The Nexus PRO can be supplied in a ready-to-assemble state with clear and comprehensive instructions or assembled for you in a right or left-handed configuration.
- Set and forget. Once the loader is assembled it never needs to be adjusted as it will self adjust to any usable cartridge length.
- Low release force and natural release directions.
- When emptied of ammo the loader collapses down to the smallest possible footprint. An empty loader will not get in the way during bending, crouching or any other form of PSG acrobatics.
Weights: PRO4 92g, PRO8 178g, PRO12 265g, PRO14 305g, PRO16g 354, PRO20 428g, PRO24 527g, PRO28 617g, PRO32 695g
As standard, the Nexus PRO comes with our lifetime warranty.
£34.99
- Pack of 25 training rounds
- 38g total weight to simulate a 28g load cartridge
- No primer
- 60mm length
- Can be shipped internationally!
Supplied in boxes of 25 cartridges.
Practice loading and drills safely in your home with the inert Magload Training Rounds. Made in-house by us to our specifications, these high-quality dummy cartridges will simulate the weight, balance and feel of a real 28g load shotgun cartridge without ever endangering you or anyone around you.
Designed to have a more consistent and straight crimp than your factory ammo. We use a precision CNC solid slug for weight to ensure long life and to prevent debris from falling into your gun. Features a pierced powder chamber.
NOTE: Do not mix live and dummy cartridges. Always be sure your gun is unloaded before practising outside of a range.
£29.99
- Firing Pin and Spring
- Heat Treated Steel
- Improved Design for Reliability
- Enlarged Hammer Contact Area
- Dry fire safe
The Magload RELIAPIN is an upgraded firing pin and spring for your .22lr rifle. Designed for greater reliability and longevity, our heat-treated steel firing pin won't let you down. Reduce both firing pin and firing pin spring breakages with the RELIAPIN! Special material, geometry and spring means that the RELIAPIN will last much longer than other pins. The improved hammer contact area and firing pin protrusion are tuned for reliability for when you need it the most. Available for:
- Smith and Wesson M&P 15-22
- CMMG .22 Conversion Kit and Bolt
- Kriss Defiance DMK
- Sig Sauer 522
The 15-22 Reliapin features an enlarged hammer contact area giving greater reliability with all aftermarket AR15 triggers. Proprietary improved firing pin & spring included with all firing pins. Developed with and tested by some of the best shooters in the world. Safe for dry fire!
From £79.99
- High retention cupped bases and double magnets
- Extremely consistent and predictable pull
- Re-configurable between left and right hand
- High-grade aluminium backplate and bars
- Modular and upgradeable
- Tool-free self-adjustment for all usable cartridge lengths
- Lifetime warranty
Our next-generation Nexus Element Gen II shotgun caddies are focused on retention without compromising your load. Featuring double magnets and cupped bases to grip when it matters. Gen II moves to aluminium backplates and bars, producing the lightest loader we have ever made! Completely UK-made, set-and-forget, switchable between left or right-hand, and available in 8, 12, 20, 28, and 32 options.
The Nexus Element Gen II comes with:
- Your loader
- PS51 Industrial Velcro, cut to size, with an alcohol swab
- Belt clip spacers
We recommend a full belt setup should be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages.
Nexus Element Gen II is a set and forget system that takes any cartridge with an unfired length from 51-67.5mm (most manufacturers quote the fired cartridge length). That means any cartridge, bird, buck, or slug you would use in training or competition will fit in the Nexus system with no further adjustment. You don't have to commit to loading either right or left-handed, it takes just 10 minutes to convert an assembled Nexus 12 from one hand to the other.
In line with MAGLOAD ethos, the Nexus Element Gen 2 is versatile, well built, easy to use, and is the most affordable system on the market. Compliant with all IPSC and 3 Gun competition rules.
Versatility
- Can be set up right or left-handed. All Nexus Element Gen IIs will be supplied assembled. Your loader can be easily reconfigured between right and left-handed setups.
- Load twins or quads whenever you want.
- Set and forget. Once the loader is assembled, it never needs to be adjusted as it will self adjust to any usable cartridge length and any cartridge on the IPSC or 3 Gun circuit.
- Can be fitted to CLIC, Tek Loks, ELS clips or used with our Velcro Competition belt.
- When empty, the loader collapses to the smallest possible footprint. An empty loader will not get in the way during bending or crouching.
- Low release force and natural release directions.
Construction
- Nexus Element Gen II backplate and bars are constructed from hard anodised aluminium.
- Sintered Nylon 12 tops, bushings and bases. There are no practical limits to the heat or cold to which they can be exposed.
- Long lasting and corrosion-free springs.
As standard, the Nexus Element Gen II comes with our lifetime warranty.
£6.99
- Reduce movement between the upper and lower receiver
- Improve accuracy and reliability
- Tooless and fast installation
- Rubber construction
With the drop-in Accu-Wedge buffer, you can quickly and easily increase the accuracy and reliability of your AR-15. The buffer removes movement between the upper and lower receiver, improving accuracy and reducing feeding issues.
Any play or 'slop' between the upper and lower receiver can seriously affect accuracy and feeding of your rifle, especially .22lr converted rifles. Simply open the upper receiver and drop the wedge into the rear of the lower, behind the takedown pin, then close the upper, compressing the wedge.
Some rifles will require the Accu-Wedge to be trimmed for best fitment.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.