-
Shop By Make & Model
- Shop By Make & Model
-
Armsan
-
Battle Arms Development
-
Benelli
-
Beretta
-
Breda
-
Calibre Innovations
-
Chiappa
-
CMMG
-
Franchi
-
GSG
-
Grand Power
-
Hatsan
-
JP Enterprises
-
Kriss
-
Lantac
-
Molot
-
Mossberg
-
Nordic Components
-
Remington
-
Ruger
-
Schmeisser
-
Sig Sauer
-
Smith & Wesson
-
Stoeger
-
Tippmann
-
Walther
-
Shop By Category
- Shop By Category
-
Shotgun
-
Rifle
-
Handgun
-
Accessories
Your cart
10 products
10 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
£54.99
- Purpose made for the fastest reloads
- Hyper-lightweight polymer construction
- Secure dual screw retention
- Range of colours available
Significantly decrease your reload times. Hyper lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag, as little as possible to catch or snag!
Lifetime guarantee as standard.
The "Mil-Spec" standard does not actually define where a magwell fits, so known, tested good fit for the Mil-Spec magwell (may fit others):
- Kriss Defiance
- Nordic NC-15
- Guncraft .22WMR
- Most cast lowers
- Aero Precision
- CMMG MK4
£6.99
- Reduce movement between the upper and lower receiver
- Improve accuracy and reliability
- Tooless and fast installation
- Rubber construction
With the drop-in Accu-Wedge buffer, you can quickly and easily increase the accuracy and reliability of your AR-15. The buffer removes movement between the upper and lower receiver, improving accuracy and reducing feeding issues.
Any play or 'slop' between the upper and lower receiver can seriously affect accuracy and feeding of your rifle, especially .22lr converted rifles. Simply open the upper receiver and drop the wedge into the rear of the lower, behind the takedown pin, then close the upper, compressing the wedge.
Some rifles will require the Accu-Wedge to be trimmed for best fitment.
£29.99
- 45-degree reduced throw
- High-quality polymer construction
- Ambidextrous
- Long and short levers included
Reduce the throw of your safety to 45 degrees to increase speed and ease of operation. Fully ambidextrous for both right and left-handed setups.
The control surfaces are plastic, so they keep a consistent temperature whether in cold or hot weather and stay grippy when wet in the rain. Manufactured using high-quality polymer, reinforced with a brass thread insert, with a choice of long or short offhand levers, you can be ready to go with a Magload 45-degree safety.
Compatible with all mil-spec AR15s, the Kriss Defiance and Gen 3 (serial numbers 18,000 and above) Tippmann M4-22.
Lifetime warranty as standard.
£49.99
- Purpose-made for practical shooting
- Hyper-lightweight polymer
- Secure retention
- Range of colours available
A slimmed-down version of our popular PRO magwell, our Mil-Spec Element Magwell gives you the same ease of loading without the cutout and enlarged flares of the PRO for a sleeker look. Hyper lightweight and self-lubricating polymer will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!
Made using our high-tech material processes with specially selected polymers, each magwell is hand-checked and has a lifetime guarantee!
The "Mil-Spec" standard does not define where a magwell fits, so known, tested good fit for the Mil-Spec magwell (may fit others):
- Kriss Defiance
- Nordic NC-15
- Guncraft .22WMR
- Most cast lowers
- Aero Precision
- CMMG MK4
£49.99
- Fits All AR-15s, 15-22, Kriss Defiance & Tippmann M4-22
- Low Profile Left Side Button
- Oversized Right Side Button
- 3 Button Styles Included (Flat, Curved and Honeycomb)
- Drop-In Upgrade No Modification Necessary
The Magload ambidextrous magazine catch is compatible with ALL mil-spec AR-15 lowers, including the Smith & Wesson 15-22, Kriss Defiance, and Tippmann M4-22. 3 different omnidirectional button shapes are included to suit you and your rifle (flat, curved, and honeycomb), treat yourself to a variety of colour choices.
This ambi mag release gives you a low-profile left-hand button and an oversized right-hand button that can be pushed from multiple directions.
Dual screw design for easy and secure fitment. Fit within seconds with absolutely no modification necessary and all tools included. Lifetime warranty as standard.
From £39.99
- Ultra lightweight
- Optimised sight picture for IPSC
- Low profile
- Tough Polymer Construction
Purpose built flip-up sights for IPSC/USPSA rifle and mini rifle, low profile and ultra lightweight. Ideal for a first set of primary IPSC sights or backup/offset sights. With both front and rear sights being elevation and windage adjustable you can find the perfect position for your eye and cheek weld. Front Sight:
- Ultra-lightweight 14.8g
- NATO / Picatinny rail mount
- Pro P4 style post, 2.5mm post with 1.5mm aperture, always in the centre of the hood
- Mil-spec height over bore, also available in 2/3 and 1/3 heights
- Stepless elevation and windage adjustable with a 2mm hex key
Rear Sight:
- Ultra-lightweight 14.2g
- NATO / Picatinny rail mount
- 1.75mm aperture with single light trap
- Mil-spec height over bore, also available in 2/3 and 1/3 heights
- Stepless elevation and windage adjustable with a 2mm hex key
45 Degree Offset
- Same sights as above
- Front 16.5g, rear 15.9g
- Calculated sight position to be a perfect 45 degree rotation from the centre of the bore
From £5.99
- Occupies the chamber to show the chamber is clear
- Suitable for all .223 chambers
- Rail mount for when not in use
- Specifically shaped to clear the extractor
- Optional flag holder
Secure the action with the Magload breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel-locking lugs so you can drop the bolt on the flag without breaking it.
Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.
The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro for easy mounting.
£24.99
- Fits All AR-15s, 15-22, Kriss Defiance & Tippmann M4-22
- Oversized Right Side Button
- 3 Button Styles Supplied (Flat, Curved and Honeycomb)
- Drop-In Upgrade No Modification Necessary
The Magload enlarged AR15 magazine release button set is compatible with ALL mil-spec AR-15 lowers, including the Smith & Wesson 15-22, Kriss Defiance, and Tippmann M4-22.
3 different omnidirectional button shapes, oversized that can be pushed from multiple directions, are included to suit you and your rifle (flat, curved, and honeycomb), treat yourself to a variety of colour choices.
Dual screw design for easy and secure fitment.
Fit within seconds with absolutely no modification necessary and all tools included!
£49.99
-
Low Profile Mil-Spec Magwell
-
D50/D60 Compatible
-
Hyper lightweight polymer
-
Secure retention
D50/D60 compatible low profile magwell for mil-spec AR-15 rifles. The low profile magwell maintains our tried and tested loading geometry in a smaller and lighter package to decrease your reload times significantly.
Hyper lightweight and constructed from self-lubricating polymer that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!
Each magwell is hand-checked and comes with a lifetime guarantee.
£74.99
- Drop-In Toolless Fitment
- Convert Your .22LR AR15 To Take S&W 15-22 Magazines
- CNC machined From 6061 Aluminium
The Boonie Packer Better-Mag S&W .22 Rimfire Magazine Adaptor allows AR15 .22 shooters using CMMG format conversion kits or dedicated uppers to use S&W M&P 15-22 magazines, with their ultra-reliable last-round hold open activation and easy-to-load thumb assist. S&W 15-22 magazines are slightly shorter front-to-back than regular AR-15 magazines, the adapter allows these to be fitted without wobble while allowing the magazine rear follower lever to activate a regular AR-15 bolt hold open latching mechanism. The adaptor is easily fitted without tools, simply insert it into the magazine well and it locks in place with a spring-loaded plunger. CNC machined from 6061 aluminium alloy with case hardened 1018 steel components the adaptor is built to meet the same milspec requirements of the receiver it will be sitting in. Will not work with the following lowers:
- Chiappa
- DPMS
- Kriss DMK
- Tactical Solutions
Please note the adapter is designed to work with CMMG format .22LR bolt conversion mechanisms which are common to many rifle builds. It will not work with other AR-15 conversion bolt groups such as CZ v22, M261, Colt, Bremmer Arms.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.