• Strong polymer construction
• Zero modification, fully reversible
• Ergonomic design
• 4 stainless steel bolt locking
• Can be individually numbered/marked

Our bases are ergonomically designed for better grip whilst loading and unloading, the bases add significantly more grab space to make loading as easy as possible. The Ruger 10/22 Magazine Base design stems from the needs of top-level Speed Steel and Steel Challenge competitors. Available individually or in a pack of 6. 

To fit, push the base on, aligning the tab on the base to the tab on the magazine. Screw-in two diagonally opposed screws, the first screw won't bite but the second screw will. Then tighten the other two screws.

If you would like to mix and match colours within the 6x bundle please leave a note on the order

As standard, our bases come with the Magload lifetime warranty.

• Lightweight polymer construction
• Single finger operation
• Zero modification, fully reversible drop-in part
• Separate bolt release lever

An extended magazine release that allows you to drop a magazine with one finger from your firing hand, while using the other to grab your next magazine for a blisteringly fast reload.

We incorporate an extra control to operate the factory bolt stop which won’t interfere with normal function. No modification is required, a drop in replacement for your factory Ruger 10/22 .22 rifle or pistol.

Note: The colour selection is for the bolt stop control only, the main lever is supplied black as standard.

• +2rd Follower Giving You 27rds Total
• Highly Durable And Lightweight Polymer
• Improved Design

Easily increase your stock Smith & Wesson M&P 15-22 magazines from 25 rounds to 27 rounds. Made out of our special high-durability and low friction, lightweight polymer.

It is recommended to use an external load assist device with this kit, as the original load assist button is no longer used.

(Magazine not included)

Easily increase your stock Smith & Wesson M&P 15-22 magazines from 25 rounds to 31 rounds with our +6 extension base. This enables you to use the full 30rd capacity for IPSC competition whilst having an extra round for the chamber on a loaded start.

Made out of our special high durability and low friction, lightweight polymer these competition components are made to give you an edge.

It is recommended to use an external load assist device with this kit as the original load assist button is no longer used.

(Magazine not included)

• +7rd extension gives you 17rds total
• Highly durable and lightweight polymer
• Base and follower kit
• +6 extensions for 25 round magazines available here

Easily increase your Smith & Wesson M&P 15-22 10-round magazine from 10 rounds to 17 rounds with our +7 extension base. This enables you to maximise the rounds in the magazine while still being low-profile enough to go prone.

The minimal added length is enough to get in and out of a magwell comfortably, while the extra weight encourages it to drop free when released. High durability and low friction polymer construction.

It is recommended to use an external load assist device with this kit, as the original load assist button is no longer used.

Note: Compatible with 10-round 15-22 magazine only, 25-round extensions can be found here.

Note: Magazine not included

• Purpose made for the S&W 15-22
• Hyper lightweight polymer
• Secure retention

A slimmed down version of our popular PRO magwell, our 15-22 Element Magwell gives you the same ease of loading without the cutout and enlarged flares of the PRO for a sleeker look. Designed for the Smith and Wesson 15-22 rifle, significantly decrease your reload times, giving you the competitive edge.

Hyper lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Lifetime guarantee as standard.

• Purpose made for the S&W 15-22
• Cut out for drum mag
• Hyper lightweight polymer
• Secure retention

Designed from the ground up for the Smith and Wesson M&P 15-22 rifle to significantly decrease your reload times.

Featuring cutouts for the Black Dog Machine drum magazines and additional flares over the Element Magwell, the PRO is designed for ultimate performance.

Hyper-lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag, as little as possible to catch or snag!

Lifetime warranty as standard.

• 45 degree reduced throw
• High-quality polymer construction
• Ambidextrous
• Long and short levers included

Reduce the throw of your Smith and Wesson M&P 15-22 safety to 45 degrees, increasing the speed and ease of operation. Fully ambidextrous for both right and left-handed setups.

The control surfaces are plastic, so they keep a consistent temperature whether in cold or hot weather and stay grippy when wet in the rain. Manufactured using high-quality polymer, reinforced with a brass thread insert, with a choice of long or short offhand levers.

Lifetime warranty as standard.

• Carbon Fibre Tube
• Nylon Nut and End Cap
• Starting from just 95g in Weight
• Designed Specifically for the 15-22
• Certified M-LOK Slots Available
• Handguard Removal Tool Sold Separately Here

Specifically designed for the Smith & Wesson M&P 15-22, compatible with all versions. 

Super lightweight with our 11" M-LOK version coming in at a mere 95g! The standard 15-22 Sport handguard for comparison weighs 155g. 

Designed to have a factory fit to minimise flex issues that are so common with AR-15 conversion nuts, and to isolate as much of the handguard movement from the barrel as possible.

Precision machined certified M-LOK slots for maximum versatility, licensed by Magpul. Our handguards have an outer diameter (OD) of 45mm and inner diameter (ID) of 38mm.

Note: Handguard removal tool sold separately here.

Note: The handguard measurements are exactly 10.7" for the 11" version and 14.7" for the 15" version. This is to give you clearance for any muzzle accessories.

• Completely upgrade your S&W 15-22
  

• Choice of either Element or Pro package

• Range of colours available

Want to completely transform your Simth & Wesson M&P 15-22? We're proud to bring you TWO upgrade packages to choose from 

The ELEMENT package includes:

• 15-22 Element Magwell
• 15-22 +6rd Magazine Extension
• 15-22 45 Degree Safety Selector
• .22 Rail Mount Breech Flag

The PRO package includes:

• 15-22 Pro Magwell
• 2x 15-22 +6rd Magazine Extensions
• 15-22 45 Degree Safety Selector
• Ambi Magazine Release
• 1/2-28 UNEF Muzzle Brake
• .22 Rail Mount Breech Flag

For more information, please see the individual product pages.

Please note: All breech flags are supplied in yellow, and muzzle brakes in black.

• Purpose made for the Schmeisser SP-9 and AR15-9
• Hyper lightweight polymer
• Secure retention

Enlarged magwell for the Schmeisser SP-9 and AR15-9. Hyper lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by single bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Lifetime guarantee as standard.

• High impact polymer
• Will withstand long term use without breaking
• High retention
• 1” hole spacing for easy retrofits
• Cartridge is angled downwards towards chamber for the perfect release
• Relief cuts on the underside to clear features on popular guns without extra filing

The Shot Saver provides that vital shot to cleanly finish a stage when you run dry, potentially saving your match. It can also be used to give a strategic advantage by working it into your stage plan. 

Lightning fast and reliable, it’s always there to save your last shot. You don’t need to take any special care when loading it. Slide or snap your cartridge in, it will work every time.

Made from a high impact polymer, this Shot Saver has been designed not to break. It has 1” hole spacing to easily retrofit to any holes you may already have in the gun. The bottom of the loader has relief cuts to get the most optimal positioning on handguards on some of the most popular guns in use, including the Benelli M2 and Beretta 1301. The cartridge is canted backward towards the chamber and has high retention. The cartridge will always be there when you need it most!

Lifetime warranty as standard.

Note: Also available in 20g, please leave a note on the order if you would like 20g instead (black only)

• Scaled down version of our 12g Shot Saver
  

• Ensure your keys always have that final saving shot

This is the last keyring you will ever need. It’s a scaled down version of a real Magload Shot Saver, made in exactly the same way on the same machines. It’ll even hold a round of ammunition, but which calibre you’ll have to discover for yourself… 

Display MAGLOAD proudly wherever you go, as long as you don’t forget your keys!

• Lightweight polymer - just 12g!
• Stainless steel bolt with brass fittings
• Standard size 26-27mm
• Orlov / Pinyo size 32-33mm

A hyper lightweight barrel clamp to reduce swinging weight where it affects you the most. Protect your magazine extensions from impacts, but if you did happen to impact it the clamp has no edges that can get caught or snagged.

The spacing is designed with our carbon extension tubes in mind and will fit other extensions - the spacing is optimal to prevent your point of impact from being changed.

The geometry of the clamp is designed to mimic a climbing shoe to focus pressure from the bolts along carefully positioned ridges to increase grip.

The clamp should ideally be positioned 7.5cm (3”) from the muzzle.

Lifetime warranty as standard.

• 2x 1.1kg release force magnets
• Solid shell retention
• Smooth load of the first shot
• Stays clear for all loading techniques

The Primus loader is a wrist mounted Option 3 (empty start) loader for when the start condition states “no ammunition on the gun”, letting you get the first round loaded as quickly as possible from your wrist or arm. 

With practice, you can load that first shot with a similar movement to a regular Option 3 Loader. Magnets and geometry retain the cartridge securely, yet the directional release lets you drop the round smoothly into the chamber. 

The loader is designed with a low profile and special geometry so that it will not impede smooth quad loading. Lightweight custom blend polymer and a genuine Velcro strap.

“A quick one off the wrist” as recommended by Dave Smith, Rossendale

Lifetime warranty as standard.

• Designed specifically for the Tippmann M4-22
• Hyper-lightweight polymer
• Secure retention

A slimmed-down version of our popular PRO magwell, designed from the ground up for the Tippmann M4-22 rifle, significantly decreases your reload times and giving you a competitive edge.

Hyper lightweight and constructed from a self-lubricating polymer that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Each magwell is hand-checked and comes with a lifetime guarantee.

• Designed specifically for the Tippmann M4-22
  
• Hyper-lightweight polymer
• Secure retention

Pro Magwell for the Tippmann M4-22. Hyper-lightweight, self-lubricating polymer will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag, as little as possible to catch or snag.

Each magwell is hand checked and comes with a lifetime guarantee.

• Secure and easy to use buckle
• Rapid fastening and adjustment
• Premium 6mm thick rubber and cork construction, with a grippy inner surface and genuine Velcro outer
• Compatible with all Nexus and Reflex loaders

SIZING: Measure around where you will wear the belt (around the belly button) + clothes and order the largest belt that will fit you.

The sizes accommodated are:

• Small 26-44" (18" of belt space)
• Medium 34-54" (26" of belt space)
• Large 42-60" (32" of belt space)

Everyone knows how to use a seat belt, and everyone knows how secure a seat belt is. Quick to fasten and quick to adjust. Avoid the faux pas of a belt coming off in IPSC, USPSA and 3 Gun competition by using the MAGLOAD Velcro Competition Belt.

Using our proprietary rubber and cork core construction, we’ve thinned this belt down to a mere 6mm, further reducing weight and increasing your range of movement without sacrificing rigidity for your loaders. 100mm wide genuine Velcro ensures that your loaders and accessories stay where you put them.

Supplied with a Magload PVC Patch and an integrated elastic strap to secure excess webbing.

Nexus PRO loaders are sold separately here

Nexus Element Gen II loaders are sold separately here

Breech Flag and Holder are sold separately here

Note: for the Small size belt, we recommend a maximum two-loader set-up of a 12 and 24, or up to a single 32. Medium and Large sizes will comfortably fit a two-loader set-up of up to a 14 and 32.

• Precision made polymer
• Temperature stable
• Regain your full sight adjustment range

This pack of 3x sight adjustment shims will allow you to dial in your Vortex red dot sight for bullet drop compensation and sight over bore issues.

Choose between the Razor fitment or Venom fitment.

Pack contains:

2x 0.5 degree shims

1x 1.0 degree shim

• Aircraft grade aluminium retaining nut
• High quality matte finish carbon
• 27g total weight, including nut
• 80% weight reduction, 101g lighter than the original steel shroud
• Perfectly balances the pistol

Like our carbon magazine tubes, this helps you shed weight from where it matters most, the furthest point away from you. The gun becomes much more controllable and agile, and balances perfectly. Make the biggest difference to your gun handling with this carbon shroud. 

Ditch your steel shroud and nut, which weighs 128g, for this carbon set which weighs only 27g - saving 80% (101g)! Point, shoot and transition with ease. This is step one in your winning formula.

Selecting the muzzle brake option will also include the aluminium retaining nut. 

Lifetime warranty as standard. 

• +5rd extension giving you 17+1rnds total
• Highly durable and lightweight polymer
• Integrated bumper
• Spring, follower and extension base included
• Easily Fitted
• Compatible magwell available here

Easily increase your Walther PPQ .22LR standard capacity from 12 rounds 17+1 total with our +5 magazine extensions.

Made out of our special high durability and low friction, lightweight polymer these competition components are made to give you an edge.

Improved follower, tuned spring, +5 extension base and allen key included (magazine not included). Magload lifetime warranty as standard.

• Aircraft grade aluminium retaining nut
• High quality matte finish carbon
• 27g total weight, 80% reduction
• Perfectly balances the pistol
• Optional Muzzle Brake

Shed weight from where it matters most. With the Magload Carbon Shroud, the gun becomes more controllable, agile, and balances perfectly. Weighing just 27g you can make the biggest difference to your gun handling. Point, shoot and transition with ease. Magload lifetime warranty as standard.

• Flared design for faster reloads
• Highly durable and lightweight polymer
• Compatible extension base available here
• Easily fitted in seconds

Take your Walther PPQ .22lr LBP to the next level with our magwell. Specifically designed for the Walther PPQ .22lr LBP, our flared magwell will make reloading easier and quicker, giving you a competitive edge. 

Made out of our special high durability and low friction, lightweight polymer.

Magload lifetime warranty as standard.

Note: The magwell will ONLY work with magazines fitted with our extension bases. Available here.

Note: Magwell fitment is only for the LBP UK version of the PPQ