• Integrated bumper
• +7 rounds
• Ultra stable follower
• MAGLOAD designed magazine spring
• Stainless steel bolts

Our Grand Power K22 extension kits will increase the capacity of your  K22 magazine from 10 rounds to 17 rounds. The kit includes a new follower, spring, base, and bolts.

Base: The base is made from a durable, lightweight polymer. It has internal bumpers to absorb the repeated shock of being dropped onto concrete floors, even while fully loaded.

Spring: Designed from the ground up for the K22 magazine, giving perfect feeding reliability throughout the whole magazine.

Follower: The wings keep it super stable inside the magazine, and the spring guide keeps the spring in place and improves the feeding of the whole magazine with the last round bolt hold open.

Lifetime warranty and 100% function guarantee as standard.

Note: Fitting the extension kit will remove the load assist, for easier loading we recommend the Maglula .22UpLULA Double Stack Magazine Speed Loader  

• Effortless reloads

• Cut out for D60/D50 compatible

• Hyper-lightweight polymer construction

• Secure retention

Flared magwell for the JP Enterprises CTR-02 with internal geometry to make reloads effortless. Hyper-lightweight, self-lubricating polymer construction that will never slow you down. Compatible with Magpul D60/D50 drum magazine.

Security is ensured by dual bolt fastening. 

Backed by the Magload lifetime guarantee.

• Purpose made for the fastest reloads
• Hyper-lightweight polymer construction
• Secure dual screw retention
• Range of colours available

Designed from the ground up for the Kriss Defiance DMK22C rifle, significantly decreasing your reload times.

 Hyper-lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag, as little as possible to catch or snag!

Each magwell is hand checked and comes with a lifetime guarantee.

• Designed specifically for the Kriss Defiance
• Hyper-lightweight polymer
• Secure retention

A slimmed-down version of our popular PRO magwell, designed from the ground up for the Kriss Defiance rifle, significantly decreasing your reload times and gives you a competitive edge.

Hyper lightweight and constructed from a self-lubricating polymer that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag, as little as possible to catch or snag!

Each magwell is hand-checked and comes with a lifetime guarantee.

• Purpose made for the fastest reload possible
• Cut out for Black Dog drum mag
• Hyper-lightweight polymer construction
• Secure retention
• Carbon black finish

Enlarged and flared magwell for the Lantac LA-SF15. Hyper-lightweight, self lubricating polymer construction. Security is ensured by dual bolt fastening.

Each magwell is hand checked and comes with a lifetime guarantee.

• Hyper-lightweight
• Designed specifically for .22lr
• Range of fitments available

Using the small amount of gas produced by a .22 round in an effective manner, bringing you a compensator that will keep your muzzle perfectly flat. SLS printed to enable us to create geometry that’s difficult to machine and keep weight down.

Choose from the drop down list for the Walther PPQ, Walther 1911, GSG Firefly, GSG 1911 and K22 M14x1.5.

Torture tested with a rapid 500 rounds and guaranteed for 10,000 rounds: 

• Made from durable and long lasting vinyl
• 1” x 8”
• 10 colours available
• Official Magload font

Our official Magload vinyl sticker, perfectly sized to fit on your shotgun magazine tube, receiver, handguard, stock or even your car!

We’ve been using these stickers for Team Magload, and even with our high standards, they can live up to whatever has been thrown at them.

• Baseball cap design
• One size fits all
• Embroidered Magload logo
• Flex Fit or Velcro options

Show off your Magload pride with our official Magload baseball cap, or simply add it to your cap collection! One size fits all with velcro adjustment or Flex Fit.

Want to buy someone a gift but no idea what to get them? Let them choose with a MAGLOAD digital gift card! Never expires, and reusable!

• Consistency of oil with lubricating properties of grease
• High level of corrosion protection
• Extreme temperature performance: From -18C to 230C
• Extremely low “stiction”
• Suitable for a wide range of metals and plastics

MagLube is a high-performance, premium gun oil with the lubricating properties of grease but the consistency of oil. MagLube is for the demanding conditions of practical shooting with high round counts and extreme temperature conditions. Use on all sliding and working parts of the gun and feel the difference instantly.

It maintains extremely high lubricity under all conditions. Even when frozen retains exceptionally low stiction and high lubrication qualities.

Ultra-low stiction, high adhesion, and high shear strength are the main features of Maglube.

•  Low stiction means parts move easier, triggers feel smoother, and actions work more reliably.

• High shear strength means that under the pressure of firing or cycling the oil will continue to lubricate rather than being pushed outwards.

•  High adhesion means even a thin layer will stay where you put it, and continue working until you clean it off.

MagLube holds dirt in suspension. When applied to clean parts, subsequent cleaning just requires a wipe with a dry microfibre cloth or tissue paper, and clean & fresh oil can be reapplied over the top.

Maglube is skin safe for worry-free field stripping.

All sizes have a child-safe cap with a thin-tip applicator for getting to hard-to-reach places.

• Pocket sized
• Lightweight and durable
• Squeeze and drop in a round - 1 per second
• Fits almost all standard pistol magazines

This universal pistol magazine loader and unloader takes all the thumb work out of loading magazines. Anyone who has loaded full mags with mighty springs like new Glock mags will not look back after trying one. Loads all calibres between 9mm and 45 ACP size (9mm, .357 Sig, 10mm, .40, and .45ACP) including 1911 mags for almost all manufacturers. Also loads most .380 double stack magazines. Works with magazines from the following manufacturers: Astra, Auto Ordnance, Arex, Barak, Beretta, Browning, Bul, Colt, CZ, EAA, FN, Glock, HK, Hi-Point, High Standard, Jericho, Kahr, Kel-Tec, Kimber, Les Baer, Llama, Luger, Magnum Research, Para Ordnance, Phoenix Arms, Ruger, Sigma, Sig/Sauer, S&W, Springfield Armory, Star, Steyr, Taurus, Vector, Walther. Will not work with the following models:

• Glock G36 6 round
• Glock G37, G38 or G39 in .45 GAP
• Kel-tec PMR-30
• Luger P08 in 9mm
• S&W 7 round 9mm for models 908, 3913, 3953 & 3954

Will not load cartridges longer than 33mm or magazines with feedlips narrower than 8mm.    

• Fast loading of magazines
• No need to handle ammunition
• Tip and shake up to a 100 rounds into the hopper
• Works with many types of .22 rifles and pistols

The Lightnin' Grip Loader from McFadden Machine is a versatile .22LR speedloader compatible with 30+ different magazine types using interchangeable adapters. It's currently the fastest speedloader for .22LR magazine in production, you can load a 25 round magazine in 10-15 seconds.

McFadden Lightning Grip adapters are sold separately. Please make sure you order the correct adapter for your magazine(s) to go with your loader.

Adapters can be quickly changed by depressing the locking button on the loader and swapping in a new one. They are also compact so it is easy to keep a few different sizes on your range bag.

Adapters:

• #M0 Magload AR-22 (Compatible with and without AR-22 Adapters fitted) (Not Compatible with Tippmann AR-22 Adapter)
• #M1 Magload AR-22 Tippmann (Compatible with our AR-22 Magazine and Tippmann AR-22 Adapter fitted only, not compatible with original Tippmann magazines)
• #M2 Magload K22 Grand Power
• #1 S&W M&P 15-22
• #2 AR15 .22LR  (including Black Dog, Kriss DMK-22, Sig 522, CMMG and Lantac magazines)

• 45-degree reduced throw
• High-quality polymer construction
• Ambidextrous
• Long and short levers included

Reduce the throw of your safety to 45 degrees to increase speed and ease of operation. Fully ambidextrous for both right and left-handed setups.

The control surfaces are plastic, so they keep a consistent temperature whether in cold or hot weather and stay grippy when wet in the rain. Manufactured using high-quality polymer, reinforced with a brass thread insert, with a choice of long or short offhand levers, you can be ready to go with a Magload 45-degree safety.

Compatible with all mil-spec AR15s, the Kriss Defiance and Gen 3 (serial numbers 18,000 and above) Tippmann M4-22.

Lifetime warranty as standard.

• Purpose-made for practical shooting
• Hyper-lightweight polymer
• Secure retention
• Range of colours available

A slimmed-down version of our popular PRO magwell, our Mil-Spec Element Magwell gives you the same ease of loading without the cutout and enlarged flares of the PRO for a sleeker look. Hyper lightweight and self-lubricating polymer will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Made using our high-tech material processes with specially selected polymers, each magwell is hand-checked and has a lifetime guarantee!

The "Mil-Spec" standard does not define where a magwell fits, so known, tested good fit for the Mil-Spec magwell (may fit others):

• Kriss Defiance
• Nordic NC-15
• Guncraft .22WMR
• Most cast lowers
• Aero Precision
• CMMG MK4

• Low Profile Mil-Spec Magwell

• D50/D60 Compatible

• Hyper lightweight polymer

• Secure retention

D50/D60 compatible low profile magwell for mil-spec AR-15 rifles. The low profile magwell maintains our tried and tested loading geometry in a smaller and lighter package to decrease your reload times significantly.

Hyper lightweight and constructed from self-lubricating polymer that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Each magwell is hand-checked and comes with a lifetime guarantee.

• Purpose made for the fastest reloads
• Hyper-lightweight polymer construction
• Secure dual screw retention
• Range of colours available

Significantly decrease your reload times. Hyper lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag, as little as possible to catch or snag!

Lifetime guarantee as standard.

The "Mil-Spec" standard does not actually define where a magwell fits, so known, tested good fit for the Mil-Spec magwell (may fit others):

• Kriss Defiance
• Nordic NC-15
• Guncraft .22WMR
• Most cast lowers
• Aero Precision
• CMMG MK4

• Purpose made for the RS-S1 and VEPR-12
• Significantly easier reloads
• Hyper-lightweight polymer
• Secure dual screw retention

Enlarged magwell for the Armsan RS-S1 and Molot VEPR-12, designed to significantly reduce reload times. Hyper-lightweight, self-lubricating polymer construction. Secure fitment ensured by dual bolt fastening.

Each magwell is hand-checked and comes with a lifetime guarantee!

• Hyper-lightweight
• Designed specifically for .22lr and .22 WMR
• Available in 1/2x20 UNF and 1/2x28 UNEF threads
• Available in 3/4" and 1" sizes

We took compensator science back to its roots to use the small amount of gas produced by a .22 round, bringing you a compensator that will keep your muzzle perfectly flat.

SLS printed to create geometry that’s impossible to machine, keep weight down, and make it economically priced. 

Both 3/4" and 1" brakes come with a timing nut for proper alignment with the barrel.

Available in 1/2x20 UNF and 1/2x28 UNEF threads.

• UNEF fits most AR-15 type .22 rifles - We can confirm the Smith and Wesson 15-22, Kriss Defiance, and Tippman M4-22 have 1/2x28 UNEF threads.

• UNF fits most other .22 rifles - We can confirm the Ruger 10/22 has 1/2x20 UNF threads.

Torture tested with a rapid 500 rounds and guaranteed for 10,000 rounds:

• Stainless Steel Nexus Element backplates
• Compatible with original Nexus, Nexus Element, Nexus Element Gen II and Nexus Pro

Combine or split out your Nexus Element modules to a new size with additional backplates. Living up to the modularity of the Nexus system, the Nexus Element backplates are 100% backwards compatible with the Original Nexus and Nexus Pro also.

Made from high-grade stainless steel, with a linished finish.

• High retention cupped bases and double magnets
• Extremely consistent and predictable pull
• Re-configurable between left and right hand
• High-grade aluminium backplate and bars
• Modular and upgradeable
• Tool-free self-adjustment for all usable cartridge lengths
• Lifetime warranty

Our next-generation Nexus Element Gen II shotgun caddies are focused on retention without compromising your load. Featuring double magnets and cupped bases to grip when it matters. Gen II moves to aluminium backplates and bars, producing the lightest loader we have ever made! Completely UK-made, set-and-forget, switchable between left or right-hand, and available in 8, 12, 20, 28, and 32 options.

The Nexus Element Gen II comes with:

• Your loader
• PS51 Industrial Velcro, cut to size, with an alcohol swab
• Belt clip spacers

We recommend a full belt setup should be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages.

Nexus Element Gen II is a set and forget system that takes any cartridge with an unfired length from 51-67.5mm (most manufacturers quote the fired cartridge length). That means any cartridge, bird, buck, or slug you would use in training or competition will fit in the Nexus system with no further adjustment. You don't have to commit to loading either right or left-handed, it takes just 10 minutes to convert an assembled Nexus 12 from one hand to the other.

In line with MAGLOAD ethos, the Nexus Element Gen 2 is versatile, well built, easy to use, and is the most affordable system on the market. Compliant with all IPSC and 3 Gun competition rules.

Versatility

• Can be set up right or left-handed. All Nexus Element Gen IIs will be supplied assembled. Your loader can be easily reconfigured between right and left-handed setups.
• Load twins or quads whenever you want.
• Set and forget. Once the loader is assembled, it never needs to be adjusted as it will self adjust to any usable cartridge length and any cartridge on the IPSC or 3 Gun circuit.
• Can be fitted to CLIC, Tek Loks, ELS clips or used with our Velcro Competition belt.
• When empty, the loader collapses to the smallest possible footprint. An empty loader will not get in the way during bending or crouching.
• Low release force and natural release directions.

Construction

• Nexus Element Gen II backplate and bars are constructed from hard anodised aluminium.
• Sintered Nylon 12 tops, bushings and bases. There are no practical limits to the heat or cold to which they can be exposed.
•  Long lasting and corrosion-free springs.

As standard, the Nexus Element Gen II comes with our lifetime warranty.

• Extremely light and predictable pull
• High and adjustable retention
• Lightest self-adjusting loader in the world, from 92g
• Velcro Competition Belt Available Here
• Huge variety of mounting and assembly options
• Tool-free self-adjustment for all usable cartridge lengths

The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!

The Nexus PRO quadloading system is our ultimate loader, lighter than any other spring adjustable loader on the market. Completely UK made, set-and-forget, left and right-handed shotgun cartridge caddy in 4, 8, 12, 14, 16, 20, 24, 28, and 32 options.

The Nexus PRO comes with:

• Your loader
• PS51 Industrial Velcro, cut to size, with an alcohol swab
• Belt clip spacers
• 10mm and 5mm spring adjustment spacers

We recommend a full belt setup would be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages. Note: Velcro Competition Belt or belt clips are sold separately.

DESCRIPTION

Nexus PRO is a set and forget system which will take any cartridge with an unfired length from 50-67.5mm (most manufacturers will quote the fired cartridge length in their technical date). That means any cartridge, bird, buck or slug that you would use in training or competition will fit in the Nexus PRO system with no further adjustment. The Nexus system can be set up either left or right-handed and changed at any time using just one Allen key. The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!

The Nexus PRO is built with IPSC and USPSA in mind and therefore conforms perfectly to IPSC and USPSA rules, but the Nexus PRO is even more suitable to 3 Gun and other disciplines than ever before. Competitors have been using the Nexus PRO in it's 4up and 8up configurations with great success in 3 Gun and other multigun disciplines.

Versatility

• Can be set up right or left-handed
• Load twins or quads whenever you want
• Self adjusts to fit any cartridge used in dynamic shooting
• Can be fitted to CLIC, Tek Loks, ELS clips or our  Velcro Competition belt
• Fully Modular
• Adjustable spring tension and hand clearance
• 4, 8, 12, 14, 16, 20, 24, 28, and 32 round configurations available

Construction

• Aerospace-grade aluminium backplate, hard anodised
• The Nexus PRO is just 50mm from front to back, including cartridges (49mm without). There is no danger of exceeding the IPSC 75mm rules even with a loose belt or a thick attachment mechanism (Tek Lok or Velcro).
• The plastic parts are made using the latest in 3D manufacturing technology. From -50 degrees C, to 150 degrees C; the Nexus PPRO will always work as you expect it to!
• Minimal maintenance is required. Self-cleaning even through the thickest of mud and sand.
• We are using the latest in materials technology to utilise spring systems that will be long lasting and corrosion-free.

Easy to use

• The Nexus PRO can be supplied in a ready-to-assemble state with clear and comprehensive instructions or assembled for you in a right or left-handed configuration.
• Set and forget. Once the loader is assembled it never needs to be adjusted as it will self adjust to any usable cartridge length.
• Low release force and natural release directions.
• When emptied of ammo the loader collapses down to the smallest possible footprint. An empty loader will not get in the way during bending, crouching or any other form of PSG acrobatics.

Weights: PRO4 92g, PRO8 178g, PRO12 265g, PRO14 305g, PRO16g 354, PRO20 428g, PRO24 527g, PRO28 617g, PRO32 695g

As standard, the Nexus PRO comes with our lifetime warranty.

• Hyper lightweight Nexus PRO backplate and bars
• Easy and fast upgrade for the original Nexus and Nexus Element Gen I

Shed significant weight, up to 50%, from your original Nexus and Nexus Element Gen I loader or change the size of your Nexus Pro and Nexus Element Gen II by upgrading it with the Nexus PRO backplate and bars!

Living up to the modularity of the Nexus system, the Nexus PRO components are 100% backwards compatible with the original Nexus and Nexus Element Gen I. Made from aerospace grade aluminium, the bars and backplate also have a hard anodised finish.

• Geometry designed to hold a round as securely as needed
• Easy, directional release
• Self adhesive velcro supplied
• Fast empty start loads

The Option 3 Loader presents a cartridge just outside the chamber which can be instantly inserted on the buzzer during an option 3 empty start. Giving you rock-solid reliability and an effortless directional release. If you don’t have one, you probably should.

Supplied with an industrial self-adhesive Velcro hook and loop fastening to allow it to be easily added and removed from the gun. For a more permanent mount we suggest 3M Licence Plate double-sided foam tape (not supplied).

Check out the newer Reflex Option 3 loader here

Note: the standard Option 3 Loader is designed for right-handed guns. If you require one for a left-handed gun (ejection from the left-hand side), please leave a note in the order.

• Highly configurable for your perfect sight picture
• Lockable elevation and windage with configurable 1/2, 1/4 & 1/8 MOA adjustments
• Return-to-zero lockable sight elements
• Auto-adjusting for backlash and wear

Purpose built sights for IPSC Mini Rifle, with a wealth of features specific to the discipline. Front Sight:

• Lightweight
• Direct barrel mount
• Fits 1", 3/4" and 11/16" barrels using included reducing collars (25.4mm, 19.05mm, 17.1mm), custom collars also available (Max 25.4mm)
• Supplied with 15 interchangeable return-to-zero post inserts (A1-A8, P1-P5, C1 & C2)
• Compatible with Magload return-to-zero metal sight elements (not supplied)
• Adjustable and lockable elevation, supplied with 1/8, 1/4 and 1/2 MOA adjustment dials
• Configurable for open hood, closed hood (tunnel) and with swappable window inserts to adjust light levels
• Hood is always concentric to the insert or element aiming point
• Auto-adjusting for backlash and wear
• Modular and upgradeable/repairable

Rear Sight:

• Lightweight
• NATO / Picatinny rail mount
• Supplied with 8 quick change, return-to-zero anti-glare sight tubes (1.2mm, 1.5mm, 1.75mm and 2.0mm in small and large tube sizes)
• Double light trap at the rear of the anti glare tubes for high contrast sight picture
• Sight tube lockable (some disassembly required)
• Ambidextrous windage dials, configurable for both left-only or right only
• Adjustable and lockable windage, configurable for 1/4 or 1/2 MOA adjustments
• Adjustable and lockable elevation, supplied with 1/8, 1/4 and 1/2 MOA adjustment dials
• Auto-adjusting for backlash and wear
• Modular and upgradeable/repairable

Front Pro Mini Rifle Rear Sight is pictured with the C2 sight post, inspired by IPSC Standard Rifle World Champion Sami Hautamaki. Both front and rear Pro Mini Rifle Sights are shipped with 1/4 MOA adjustments on all axes, and can be reconfigured with the supplied parts. Rear Pro Mini Rifle Sight is shipped in an ambidextrous configuration and can be reconfigured left/right with the included single sided lead screw. Front Sight Posts:

• Occupies the chamber to show the chamber is clear
• Suitable for all .22 chambers
• Rail mount for when not in use
  
• Optional flag holder

Secure the action with the rail mount .22 breech flag! Designed to stand off from the bolt face to protect your extractor and a relief cut on the underside to protect barrel mounted ejectors, such as the one on a Smith and Wesson M&P 15-22.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection, or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

• Occupies the chamber to show the chamber is clear
• Suitable for all .223 chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Optional flag holder

Secure the action with the Magload breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel-locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro for easy mounting.

• Occupies the chamber to show that the chamber is clear
• Suitable for all 12g chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Flag holder can be attached with velcro (supplied) or by bolting to a Tek Lok or directly to the belt

Secure the action with the Magload rail mount 12g breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

• Aluminium Reflex Loader backplates
• Compatible with Reflex Loader

Combine or split out your Reflex Loader modules to a new size with additional backplates.

Made from high-grade aluminium, with a hard black anodised finish.

• Designed to hold a single round as securely as needed
• Folds to only 5.5mm in width
• Industrial 3M adhesive tape supplied
• Fast empty start loads

The most compact and low profile option 3 (empty start) loader on the market. Designed to stay permanently on the gun without getting in the way when not in use. 

The REFLEX Option 3 Loader presents a cartridge just outside the chamber which can be knocked in right after the buzzer on an empty chamber/unloaded start on IPSC and USPSA stages. The loader will naturally fold in only protruding 5.5mm, avoiding any snagging whilst quadloading or operating the gun during the rest of the stage.

Supplied with industrial 3M double-sided tape to allow it to be easily fitted to the gun.

Note: the standard Option 3 Loader is designed for right-handed guns, if you require one for a left-handed gun (ejection from the left-hand side) please leave a note in the order.

• Worlds First Self Collapsing Loader
• 4, 8 and 12 Capacity Available
• Left/Right Hand Switchable
• Variety Of Mounting Options
• REFLEX Option 3 Loader Available Here

Welcome to REFLEX, the world's first self collapsing quad and dual shotgun loader.

Designed for the 3-Gun and IPSC market the REFLEX loader is available as a 4, 8 or 12 round capacity shotgun caddie which completely folds up after deployment. In the collapsed position the REFLEX becomes the world's smallest loader reducing the chance of snagging and making it far easier to go prone or take other positions during a stage. High strength magnets hold your cartridges in place during high energy movements while the light release force means it’s fast to load from.

Constructed from aerospace-grade hard anodised aluminium and polymer for long lasting and corrosion-free use. Minimal maintenance is required, and self-cleaning even through the thickest of mud and sand. The stainless steel collapsing springs have been heat treated for durability. REFLEX can be configured to be right or left-handed in seconds giving you ultimate flexibility in your competition set-up. Weights: Reflex 12 - 311g, Reflex 8 - 207g and Reflex 4 - 103g

Capable of being mounted with a variety of solutions, including CLIC, Tek Loks, other belt clips and Velcro.

Supplied in the box are 1 x REFLEX loader, 2 x attachment spacers, 1 x Velcro piece and 1 x alcohol wipe Lifetime warranty as standard.

• Firing Pin and Spring
• Heat Treated Steel
• Improved Design for Reliability
• Enlarged Hammer Contact Area
• Dry fire safe

The Magload RELIAPIN is an upgraded firing pin and spring for your .22lr rifle. Designed for greater reliability and longevity, our heat-treated steel firing pin won't let you down. Reduce both firing pin and firing pin spring breakages with the RELIAPIN! Special material, geometry and spring means that the RELIAPIN will last much longer than other pins. The improved hammer contact area and firing pin protrusion are tuned for reliability for when you need it the most. Available for:

• Smith and Wesson M&P 15-22
• CMMG .22 Conversion Kit and Bolt
• Kriss Defiance DMK
• Sig Sauer 522

The 15-22 Reliapin features an enlarged hammer contact area giving greater reliability with all aftermarket AR15 triggers. Proprietary improved firing pin & spring included with all firing pins. Developed with and tested by some of the best shooters in the world. Safe for dry fire!