• Stiff, rigid with little flex

• Two-part velcro design

• Compatible with CLIC, Double Alpha, Tek Lok and Safariland Belt Clips

• 1.5" Width, rectangular profile

• CLIC security buckle and Magload PVC patch included

Designed from the ground up to be the stiffest, lightest two-piece shooting belt on the market, giving superb support to any accessories you want to mount. Perfect for IPSC, USPSA, 3 Gun, and other competitive shooting disciplines. 

"The Stiffy" 2-part IPSC belt is 1.5" wide and only 0.25" thick, making it compatible with CLIC, Tek Lok, Double Alpha, and Safariland belt clip systems. Ideal for handgun, rifle or shotgun shooting. The two-part design uses the highest quality Velcro to ensure a secure attachment every time. Featuring a 5.5" strip of velcro on the front section for any patches.

The inner belt features a chamfer for easy threading through belt loops, a 1mm polymer reinforcing layer for added stiffness and only 3.25mm thick, comfortably worn over any trouser belt. The outer belt also features a chamfer for easy threading through belt loops, a rectangular profile for accessory stability, a strong 4mm polymer reinforcing core and maximum velcro availability on the back. Included with each belt are a CLIC security buckle and a Magload PVC morale patch. Available sizes are:

• 105cm - (Fits waist size 26-35") - 284g
• 121cm - (Fits waist size 32-41") - 312g
• 136cm - (Fits waist size 38-47") - 325g
• 151cm - (Fits waist size 43-53") - 399g
• 176cm - (Fits waist size 51-63") - 456g

• +6rd extension
• Highly durable and lightweight polymer
• Stackable (with correct spring)

Tested and developed with Rifle World Champion Jarkko Laukia, our +6rd PMAG extensions will fit all Gen M3 PMAGs and extend their capacity by 6 rounds.

Made out of durable and lightweight polymer. Fixed by a secure, strong single screw lock. Compatible with Ranger bases and similar accessories.

The extensions can be stacked to fine tune your mag length for a stage if needed. Generally, the stock spring in a magazine is good for 1x extension, so if you have a 20 round mag and you extend it to 32, you need a spring from a 30 round mag. This would in theory enable you to add a third extension with this same spring.

(Magazine & spring not included)

• Occupies the chamber to show that the chamber is clear
• Compact design
• Flag holder holds all breech flags
• Suitable for all 12g chambers

Suitable for all 12g shotguns, secure the action with the MAGLOAD breech flag!

Featuring a relief to clear the extractor, preventing damage. Designed to have a compact size and accommodate a hole for any keyring you may want to hang from it.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial Velcro and also holes for direct attachment.

• Hyper lightweight
• Low friction self-lubricating nylon
• Durable design
• Extended shape
• Fire red finish

An often overlooked but vital part of your gun. Our Benelli Supernova and Nova Speed followers are slightly oversized for overzealous port jobs, hyper lightweight, and smooth operation, everything a follower needs to be. 

If you suffer from shell surge, a lightweight follower will help and even cure it. If your connection to your magazine tube isn't quite right, the extended shape will help guide the follower without catching.

Made out of lightweight, low friction, and self-lubricating nylon this is a follower you can put your trust in.

Lifetime warranty as standard.

• Lightweight and strong polymer construction
• Textured surface for extra grip
• Larger than standard bolt for extra security
• Anti-double feed built right in!

Eliminate the common Beretta 1301 double feed malfunction, and enlarged design to give faster operation. A larger surface area over standard for better contact and operation with a textured surface for better grip.

Lifetime warranty as standard.

• Fits All AR-15s, 15-22, Kriss Defiance & Tippmann M4-22
• Low Profile Left Side Button
• Oversized Right Side Button
• 3 Button Styles Included (Flat, Curved and Honeycomb)
• Drop-In Upgrade No Modification Necessary

The Magload ambidextrous magazine catch is compatible with ALL mil-spec AR-15 lowers, including the Smith & Wesson 15-22, Kriss Defiance, and Tippmann M4-22. 3 different omnidirectional button shapes are included to suit you and your rifle (flat, curved, and honeycomb), treat yourself to a variety of colour choices.

This ambi mag release gives you a low-profile left-hand button and an oversized right-hand button that can be pushed from multiple directions.

Dual screw design for easy and secure fitment. Fit within seconds with absolutely no modification necessary and all tools included. Lifetime warranty as standard.

• Polymer Construction
• Split Shell Screwed Design
• 31 Round Capacity
• Last Round Bolt Hold Open
• Enlarged Feedlips For Durability
• Designed For Reliability
• Adapters Available Here
• AR-22 Bolt Catch Available Here

The Magload AR-22 Magazine is designed from the ground up for competition .22lr AR-15 rifles, have increased reliability, increased durability, and increased capacity to 31 rounds as standard.

Enlarged feed lips and improved polymer blend to reduce wear, giving longer-lasting magazines. Split shell, screwed injection moulded design allowing disassembly for inspection and cleaning. Developed with and tested by some of the best shooters in the world.

Compatible with the S&W 15-22 and Better-Mag adapter-fitted rifles out of the box, with no adapters or additional accessories required. The magazine also features the ability to attach our proprietary AR-22 Adapters for compatibility with CMMG .22 converted rifles (without the Better-Mag adapter fitted), Tippmann M4-22, Kriss Defiance, JP Enterprises JP-22, and Nordic Components NC-22/RB-22.

Retain the last round bolt hold open with our AR-22 Bolt Catch, not required when using our magazines with the S&W 15-22 or Better-Mag adapter.

Easily load your AR-22 with either the Tippmann or McFadden Speed Loader. The McFadden loader requires our own specific adapters, either the #M0 or #M1, depending on the configuration. Both are available here.  

Configuration Compatibility 

• AR-22 Magazine Only - S&W M&P 15-22 and rifles fitted with a Better-Mag Adapter.
• AR-15 Adapter - All rifles using CMMG, BoreBuddy, Spikes, or Ciener .22lr bolts, without the Better-Mag Adapter. 
• JP/Nordic Adapter - All rifles using JP Enterprises or Nordic Components .22lr bolts.
• Tippmann Adapter - All models of Tippmann Arms M4-22. 
• Kriss Adapter - All models of Kriss Defiance DMK  

NOTE: For orders to the USA the magazine must be ordered with an adapter fitted. 'AR-22 Magazine Only' configuration can not be shipped to the USA

NOTE: If you would like your magazine to be restricted to 10 rounds for regional compliance, please leave a note on your order.

Please don’t call it a charger or a clip, it’s a magazine!

• AR-22 Magazine Adapters
• Better-Mag Replacement
• Range Of Fitments

Add-on adapters for our AR-22 Magazine for use with mil-spec AR-15s (without the Better-Mag Adapter), Tippmann M4-22, Kriss Defiance DMK, JP Enterprises JP-22, and Nordic Components NC-22/22RB. Easily and quickly clip into the AR-22 Magazine to give compatibility to a range of rifles, unscrew the two halves of the magazine and slot it into place. Retain the last round bolt hold open with our AR-22 Bolt Catch. Adapters:

• #1 AR-15 Mil-Spec
• #2 JP Enterprises JP-22 / Nordic Components NC-22/22RB
• #3 Tippmann M4-22
• #4 Kriss Defiance DMK

Don’t call it a charger or a clip, it’s a magazine!  

• Range Of Sizes
• Hyper-lightweight
• Increase Sight Radius
• Increase Precision

Improve your iron sight shooting with our barrel-mounted picatinny rail (NATO spec). Mounting your front sight further forward with our mount will give you a larger sight radius improving precision.

17mm - 16.5-17.1mm barrels (designed specifically for the standard 15-22 barrel and will match the OEM height of the receiver rail)

19.1mm (3/4") - 18.5-19.1mm barrels (confirmed fitment for the Tippmann M4-22, Kriss Defiance and 15-22 Performance Centre barrels)

25.4mm (1") - 24.8-25.4 barrels

Different barrel size than listed please contact us: info@magload.co.uk Lifetime warranty as standard. 

Note: Strictly for .22lr and .22 wmr use only 

Note: Sights not included

• Hyper lightweight polymer
• Secure retention
• Clamshell shell design

Competition Magwell for the Battle Arms Development XIPHOS 9 Rifle PCC receiver. Hyper lightweight, self-lubricating polymer will never slow you down. Security is ensured by a clamshell design that hugs the contours of the original magwell. Designed like all our products for low drag - as little as possible to catch or snag!

Made using our high-tech material processes with our specially selected polymers, each magwell is hand-checked and comes with a lifetime guarantee!

• Enlarged and flared for the fastest reloading possible
• Designed specifically for the unique BAD receiver design
• Hyper-lightweight polymer construction
• Secure clamshell retention

Enlarged and flared magwell for the unique Battle Arms Development receiver design. Including the Authority Elite, OIP, and Ambi. Featuring geometry for maximum compatibility with the Magpul D60/D50 drum magazine!

Hyper-lightweight, self-lubricating polymer will never slow you down. Security is ensured by a dual bolt fastening clamshell design. 

Each magwell is hand-checked and comes with a lifetime guarantee!

• Light weight and strong polymer construction
• Laser sintered surface for extra grip
• Compatible with Benell M2 SP and SPEED
• Streamlined and larger than stock
• Reduce snag risk and reduce interrupted quadloads

Created with the optimal profile for the release button, raising it away from the port and streamlining the shape to move it out of the way of your quadloads and reduce the risk of snagging significantly.

It's much larger than the stock buttons and is designed to be obviously different when it needs pressing (i.e. when you run dry) by touch alone, without having to look at the chamber. Compatible with both the Benelli M2 SP and M2 SPEED.

Lifetime warranty as standard.

• Flat and Curved Options
• High-performance polymer adjustable trigger
• Pretravel and overtravel adjustments
• Help with trigger freeze
• Help with prep

A massive improvement over the stock trigger, with tighter tolerances and pretravel/overtravel adjustments. Use this trigger to reduce trigger freeze, improve the feel of the trigger, and aid in prep disengage*.

A small part that makes a big difference to the operation of the gun, using a precision press fit hardened steel pin and stainless grub screws. Additionally, with supporting modifications, it can relieve prep, which is a genuine and proven way to make anyone faster.

The Pretravel adjustment can be used to dial in/out the first stage of the trigger making it a travel adjustable 2 stage trigger. Gone are the days of drilling and tapping your trigger guard for an overtravel stop!

Fits the Supernova only. The package includes the trigger, with pre fitted screws and pin, and a 1.5mm hex key. Installation guide: youtube.com/watch?v=bS30F6bb4WA

*unlocking the gun with rearwards pressure on the pump handle. May need additional supporting mods.

• Drop-in kit
• No modifications
• Enlarged release button
• Pre-drilled improved latch

Upgrade your Beretta (A300, A400, and 1301 series) and Armsan A612 shotgun with our drop-in pre-threaded (drilled and tapped) latch and enlarged button kit with no modifications required. In addition to being pre-threaded to attach the supplied enlarged button, the shape and finish of the latch are improved to make loading easier and faster.

The Magload enlarged shotgun bolt release button is designed for speed and control. A larger surface area over standard for better contact and operation with a textured surface for better grip.

Included in the kit are the upgraded latch, retention pin, improved spring, enlarged button, and M3 stainless steel screw.

Lifetime warranty as standard.

• Beretta Pro style lifter
• Lifter hold-down function
• For 3" and 3.5" chambers
• Genuine Beretta parts #C7C940 and # C7C121
• Drop in, no gunsmithing part
• Easy retrofit

Upgrade your Beretta semi-auto shotgun to include the lifter hold-open function.

These lifters are Pro specification factory parts from Beretta which includes the hold open function, resulting in faster and easier loading. The hold open function uses a specifically designed ramp to interface with the carrier catch to hold the lifter down while loading.

Compatibility

3" chamber models (C7C940): All Beretta semiautomatic shotguns with lifter for 3"/76MM shells in 12 gauge that are equipped as standard with item #C5D552 (or the corresponding trigger group #C8A275 or #C89785), such as:

• 1301 Tactical
• A400 Upland
• A400 Xcel
• A400 Novator
• A400 Xplor
• A400 Lite
• A400 Ultralite
• A300 Outlander

3.5" chamber models (C7C121): This is the lifter introduced with the 1301 Comp PRO, which is compatible with all 3.5" receiver A400 style shotguns, such as:

• 1301 Comp
• 1301 Comp Pro
• A400 Xtreme Plus
• A400 Xtreme Unico
• A400 Xtreme
• A350 Xtreme
• TX4

• Extremely Light Weight – 73g for a 500mm (+8rd) tube
• High Strength Carbon Fibre
• Impact-Resistant Polymer

These carbon 12g shotgun magazine extensions are designed to shed weight from the place it affects you the most, resulting in faster transitions and easier gun manipulation by lowering the moving mass. Just 73g on a 500mm tube.

Note: The extension tube will add to the internal standard capacity of the gun; for instance, a Benelli M2 has an internal capacity of 4 rounds, and a +6 extension tube will give 10 rounds total in the magazine tube.

High spec carbon fibre made to our specification with a premium matte finish. The one piece carbon magazine is bonded using cutting edge adhesives used in the automotive industry for sports car chassis.

To calculate the number of rounds, count 60mm per round and +30mm for the spring and follower. For example, for a +8rd tube, you need 8 x 60mm (480mm) plus 30mm which is 510mm. Cut tolerance is +/- 2mm.

For reference, a Beretta 1301 has a standard internal capacity (without an extension tube) of 5, and the Benelli M2 (all variants) has a standard internal capacity of 4. The total capacity of the gun would be the standard internal capacity plus the extension's capacity. For example, if you would like your Beretta 1301 to have a total capacity of 10 you would need a +5 tube. All known standard internal capacities are listed below.

• Benelli M2 (all variants) - 4 rounds
• Benelli M4 - 5 or 7 rounds (depending on variant)
• Benelli Nova - 5 rounds
• Benelli Nova SPEED - 5 rounds
• Benelli Supernova - 5 rounds
• Beretta 1301/Tactical - 5 rounds
• Breda B12i - 4 rounds
• Mossberg 940 / 930 - 4 rounds
• Mossberg 590 - 6-8 rounds
• Stoeger M3000 / M3K - 5 rounds
• Remington 870 - 4 rounds

For any help or recommendations, please don’t hesitate to get in touch using the Contact Us form.

For example, if you wanted an extended shotgun magazine to take your Beretta 1301 Tactical from 5 shell capacity to an extended 7 rounds, you should select a +2 cartridge magazine tube. Magazine spring is sold separately here.

NOTE: 2-3 weeks for delivery, each tube is made to order! Please read the specifications above. As these are custom tubes, we will not be able to accept returns.

• 1911 / 2011 Style Grip Angle
• Compatible With All Chiappa Rhinos, Including UK Legal LBR
• Toughened Polymer Construction
• Textured Surface For Maximum Grip
• Tools And Hardware Supplied

Designed with inspiration from the 1911/2011 grip angle, give yourself full control of the gun with a perfect, natural, enlarged grip. Constructed from toughened polymer, these grips are made to last and are manufactured to withstand all that you can throw at them. 

Compatible with all variants of the Chiappa Rhino, including the UK legal long-barreled revolver. Easily and quickly fitted to your gun in seconds using the supplied tools and hardware.

Backed by the Magload lifetime warranty.

Part of our CLIC belt clip range, the 12g Holder retains either one (single) or two (double) 12g cartridges for your initial load or for when you've exhausted everything else!

The 12g Holder is quick-release and mounts into the CLIC QRB or CLIC Security Buckle, which can be purchased separately here. Made from a highly durable and lightweight polymer for all conditions. Lifetime warranty as standard.

Click here for the Quick Release Base this clip attaches to.

The Clic belt clip system is designed specifically for IPSC, 3 Gun and USPSA disciplines to be rock solid on the belt, with the QRB 1.5" or QRB 2.0" accessories becoming quick and easy to remove with the quick-release function. Clic takes up the absolute minimum amount of space, so you can stack them close together if needed, giving you additional room for belt accessories.

There are 4 options of bases, the Solo, QRB 1.5", QRB 2.0", or QRB Velcro:

• Clic Solo - For permanent attachment of accessories.
• Clic QRB 1.5" - Quick release base for standard 1.5" 2-part IPSC belts.
• Clic QRB 2.0" - Adjustable quick-release base for any 1.0"-2.0" belts in 0.25" increments with supplied spacers.
• Clic QRB Velcro - Velcro mounted QRB base for velcro competition belts, velcro applied as standard, screw holes available for fixed mount.

For both QRB bases, there is a range of compatible different-size mounting plates for any application:

• The single-row QRS plate is for all MAGLOAD loaders and other accessories like magazine pouches, with 3x bolt holes.
• The triple-row QRT plate is for people who are moving to this system from a Tek Lok or Hoppner & Schumann belt clip and want the same layout.
• The ball joint QRA plate is for angle-adjustable single-hole mounting such as magazine pouches. Designed specifically for the Double Alpha XiP and Race Master pouches
• The Clic One plate is one plate to fit on all QRB bases, one slot for adjustability and versatility, sized for the QRB 2.0".

Clic uses captured nuts for easy assembly. The clips can be used with hex bolts instead of nuts should you want threaded studs, and can be configured in many ways to suit what you need. All the hardware we supply is marine-grade stainless steel for maximum weather protection. Solo is 60x24mm, 14.5mm deep, and sits 5.5mm from the belt. QRB 1.5" is 60x24mm, 16.5mm deep, and sits 7.5mm from the belt. QRB 2.0" is 72x24mm, 20mm deep, and sits 11mm from the belt. All clips and Solo come with 2x nuts, 2x bolts, and 2x spacers.

Quick detach CLIC breech flag holders for 12g or .22lr and .223 breech flags, both can also be used as convenient glasses holders! Quickly switch between breech flag holders with CLIC. Compatible with the Magload Clic system, will require a CLIC QRB belt clip attachment or CLIC Security Buckle. 

• CLIC 12g Holder fits Magload 12g flags
• CLIC .22/.223 Holder fits Magload .22 and .223 flags

Click here for the Quick Release Base this clip attaches to.

*flag not included unless selected as an option

• Ultra lightweight
• Optimised sight picture for IPSC
• Low profile
• Tough Polymer Construction

Purpose built flip-up sights for IPSC/USPSA rifle and mini rifle, low profile and ultra lightweight. Ideal for a first set of primary IPSC sights or backup/offset sights. With both front and rear sights being elevation and windage adjustable you can find the perfect position for your eye and cheek weld. Front Sight:

• Ultra-lightweight 14.8g
• NATO / Picatinny rail mount
• Pro P4 style post, 2.5mm post with 1.5mm aperture, always in the centre of the hood
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

Rear Sight:

• Ultra-lightweight 14.2g
• NATO / Picatinny rail mount
• 1.75mm aperture with single light trap
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

45 Degree Offset

• Same sights as above
• Front 16.5g, rear 15.9g
• Calculated sight position to be a perfect 45 degree rotation from the centre of the bore

• Durable Kydex Construction
• Adjustable Retention
• Versatile Ambidextrous Mounting Slots
• Clic Belt Clips Available Here

Designed specifically for IPSC, 3 Gun and USPSA disciplines to offer secure and reliable retention for your rifle magazines.

Currently available are; - S&W 15-22 Pouch: Compatible with our AR-22 magazines (without adapters fitted) and 15-22 magazines. - AR-15 Mil-Spec Pouch: Compatible with our AR-22 magazines (with adapters fitted) and mil-spec magazines (tested with all PMAG, Kriss DMK, Tippmann M4-22, Blackdog, Lancer, Stanag).

Moulded Kydex construction, from P1 2mm Kydex T, with rubber washers for adjustable retention. Each pouch features mounting slots on both sides for attaching to a range of belt clips including Tek Lok, Safariland ELS, and our own CLIC system. Offering up to 45 degrees of angle adjustment on the belt clip. We recommend using our CLIC Drop Link to lower the magazine for a more ergonomic grab and either a CLIC SOLO for a static mount or a CLIC QRB + QRS for quick-release mounting.

Lifetime warranty as standard.

Note: Belt clip attachments are sold separately here. For a static mount, we recommend a Clic Solo, for quick detach, we recommend a CLIC QRB + QRS. In addition to either we would also recommend a CLIC Link to lower the pouches from the belt for a more ergonomic grab.

• Fits All AR-15s, 15-22, Kriss Defiance & Tippmann M4-22
• Oversized Right Side Button
• 3 Button Styles Supplied (Flat, Curved and Honeycomb)
• Drop-In Upgrade No Modification Necessary

The Magload enlarged AR15 magazine release button set is compatible with ALL mil-spec AR-15 lowers, including the Smith & Wesson 15-22, Kriss Defiance, and Tippmann M4-22.

3 different omnidirectional button shapes, oversized that can be pushed from multiple directions, are included to suit you and your rifle (flat, curved, and honeycomb), treat yourself to a variety of colour choices.

Dual screw design for easy and secure fitment.

Fit within seconds with absolutely no modification necessary and all tools included!

• Polymer Construction
• Easier Latch Operation
• Drop-In Upgrade

Flick your holster lock on and off with ease with our enlarged holster lock lever, add a bit of flair and colour code your holster blocks too! 

Simple installation in under 2 minutes, no modification required and easily reversible.

Compatible with Double Alpha Racemaster and Alpha X holster blocks, please ensure your trigger guard does not extend out of the back of your block or the enlarged lever will foul.

• 13g Weight
• 30mm Handle Length
• Mil-Spec Black Nickel Finish
• 10 Sets Customisable Coloured O-Rings Supplied

Engineered for lightness and toughness, our enlarged charging handle comes in at just 13g, the same weight as your stock charging handle, reducing metal fatigue and ensuring the same reliability you are used to from your gun.

Precision machined offering the perfect balance between strength and toughness with a mil-spec black nickel-plated finish to stand up to the most extreme conditions. With a 30mm handle length we believe this is the sweet spot of size, offering enough space to quickly charge the handle whilst not risking snagging on stage furniture.

Combined with our custom rubber o-rings for additional grip you will be confident on even the wettest days. Supplied with 10 different coloured sets of o-rings to add your own personal flair to your gun: White, Black, Red, Yellow, Light Blue, Dark Blue, Orange, Green, Pink and Purple.

Lifetime warranty as standard.

Compatibility List:

Benelli: M2, M2SP, M2 SPEED, M3, SBE, SBEII, SBEIII, Cordoba, Montefeltro, Ethos, SuperSport, and Legacy

Breda: B12i and 930i

Franchi: Variomax, Intensity, Affinity, and I-12

Stoeger: M3000, M3500, and M3K

Beretta 1301/A400: A350 Xtrema 1, A391 Xtrema 2, A400 Xplor, A400 Excel, A400 Xtreme Unico, A400 Xtreme Plus, 1301 Comp, 1301 Comp Pro, 1301 Tactical, and Tx4 Storm

Beretta A300: A300, A303, A390, A391, and A3901

Mossberg: 930 and 940    

• Lightweight and strong polymer construction
• Laser sintered surface for extra grip
• Longer than standard bolt for extra security

Lightweight enlarged shotgun bolt release button for faster bolt release operation. A larger surface area over most standard buttons for better contact and easier operation, with a textured surface for better grip. 

An M3 stainless steel screw is supplied with the button. Will require your existing button to be drilled and tapped with an M3 thread. 

Lifetime warranty as standard

• Stainless Steel
• Set of 6 – Full, 3/4, 1/2, 1/4, 1/8, and Cylinder
• Laser Engraved Choke Selection Guide
• Extended For Easy Installation
• MTM Hard Case Included

Extended 12 gauge competition shotgun chokes made to our exact specification, available in the Crio Plus, Mobil, and Optima HP fitments. Each set contains 6 choke tubes to cover every scenario you'll likely find in IPSC, 3Gun, or any dynamic shooting competition, including; Full, 3/4 (Improved Modified), 1/2 (Modified), 1/4 (Improved Cylinder), 1/8 (Skeet), and Cylinder.

Stainless steel construction for all-weather performance and corrosion resistance. No choke key slot to keep muzzle smooth reducing flyers, taper on full length of choke tube for a more consistent pattern. Extended and knurled for easy and toolless installation. Magload lifetime warranty as standard.  

Choke Fitment Guide:

Crio Plus - Benelli M2, Benelli M2 SP, Benelli M2 SPEED, Benelli Nova SPEED, Benelli Montifeltro (2007 onwards), Benelli Cordoba (pre 2006), Benelli Ethos, Benelli Vinci, Benelli Super Black Eagle II & III, Benelli Super Sport, Benelli Ultralite, and Breda B12i

Mobil - Benelli Nova, Benelli Supernova, Benelli M1, Benelli M3, Benelli M4, Benelli Black Eagle I, Benelli Legacy, Benelli Montifeltro (pre 2007), Benelli Super Black Eagle I, Stoeger M3000, Stoeger M3500, Stoeger M3K, Franchi Infinity, Franchi Variomax, Franchi Affinity, Franchi I-12, Beretta A300, Beretta A301, Beretta A302, Beretta 303, Beretta A390, and Beretta 391.

Optima HP - Beretta A400, Beretta 1301, Beretta 1301 Comp Pro